Type of Document	Dissertation
Author	Faris, Waleed Fekry
Author's Email Address	wfaris@vt.edu
URN	etd-01142004-134524
Title	Nonlinear Dynamics of Annular and Circular Plates Under Thermal and Electrical Loadings
Degree	PhD
Department	Engineering Science and Mechanics
Advisory Committee	Advisor Name Title Nayfeh, Ali H. Committee Chair Kohler, Werner E. Committee Member Librescu, Liviu Committee Member Ragab, Saad A. Committee Member Wicks, Alfred L. Committee Member
Keywords	Thermal Electrical Annular Plates MEMS Circualr Plates Nonlinaer Dymnamics
Date of Defense	2003-12-16
Availability	unrestricted
Abstract The nonlinear static and dynamic response of circular and annular plates under electrostatic, thermal, and combined loading is investigated. The main motivation for the study of these phenomena is providing fundamental insights into the mechanics of micro-electro-mechanical-systems (MEMS). MEMS devices are usually miniaturization of the corresponding macro-scale devices. The basic mechanics of the components of many MEMS devices can be modeled using conventional structural theories. Some of the most used and actively researched MEMS devices- namely pressure sensors and micropumps- use circular or annular diaphragms as principle components. The actuation and sensing principles of these devices are usually electrostatic in nature. Most MEMS devices are required to operate under wide environmental conditions, thus, a study of thermal effects on the performance of these devices is a major design consideration. There exists a wide arsenal of analytic, semi-analytic, and numerical tools for nonlinear analysis of continuous systems. The present work uses different tools for the analysis of different types of problems. The selection of the analysis tools is guided by two principles. The first consideration is that the analysis should reveal the fundamental mechanics and dynamics of the problem rather than simply generating numerical data. The second consideration is numerical efficiency. Guided by the same principles, the basic structural model adopted in this work is the von-Karman plate model. This model captures the basic nonlinear phenomena in the plate with minimal complexity in the equations of motion, thus providing a balance between simplicity and accuracy. We address a wide array of problems for a variety of loading and boundary conditions. We start by analyzing annular plates under static electrostatic loading including the variation of the plate natural frequencies with the applied voltage. We also analyze parametric resonances in plates subjected to sinusoidally varying thermal loads. We investigate the prebuckling and postbuckling static thermal response and the corresponding variation of the natural frequencies. Finally, we close by investigating the problem of a circular plate under a combination of thermal and electrostatic loading. The results of this investigation demonstrate the importance of including nonlinear phenomena in the modeling of MEMS devices both for correct quantitative predictions and for qualitative description of operations.
Files	Filename       Size       Approximate Download Time (Hours:Minutes:Seconds)     28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access    thesis.pdf 686.01 Kb 00:03:10 00:01:38 00:01:25 00:00:42 00:00:03

If you have questions or technical problems, please Contact DLA.