Type of Document Master's Thesis Author Kon, Haruhiko URN etd-01242009-063346 Title Characterization of adhesively bonded joints using bulk adhesive properties Degree Master of Science Department Engineering Mechanics Advisory Committee
Advisor Name Title Grant, John Wallace Committee Chair Griffin, Odis Hayden Jr. Committee Member Loos, Alfred C. Committee Member Keywords
- Joints (Engineering)
Date of Defense 1991-10-05 Availability restricted Abstract
Though using bulk adhesive properties to predict adhesively bonded joint response has yet to be proven infallible, based upon the success of previous works, this effort attempts to shed some light on the stresses present in a typical automotive bonded joint. Adhesive material properties obtained in previous works were used in a finite element analysis of a simulated automotive joint to predict the stresses in that joint.
The automotive joint analyzed was a simplified representation of a joint provided by General Motors. The specifications included the rate or stiffness of the joint and the materials to be used. The basic design of the joint is a rectangular solid section steel frame to which an SMC panel is bonded using Ashland Chemical urethane based adhesives.
Due to computer time constraints and problem complexity, a complete analysis including a time dependent, viscoelastic analysis was not possible. The linear elastic case analyzed gave important insight into the magnitudes of stresses to be expected in a typical joint. It was found that for an applied load to produce a 1 degree deflection in the steel frame, the stresses in the adhesive were below 20% of the ultimate tensile strength of the adhesive. This low stress state is significant because the adhesive behaves as a linear viscoelastic material in that range, making further analysis less complicated and time consuming.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access LD5655.V855_1991.K66.pdf 2.89 Mb 00:13:22 00:06:52 00:06:01 00:03:00 00:00:15next to an author's name indicates that all files or directories associated with their ETD are accessible from the Virginia Tech campus network only.
If you have questions or technical problems, please Contact DLA.