Title page for ETD etd-02092008-130529


Type of Document Master's Thesis
Author Wachsmuth, John Paul
URN etd-02092008-130529
Title Multiple Independent Extrusion Heads for Fused Deposition Modeling
Degree Master of Science
Department Mechanical Engineering
Advisory Committee
Advisor Name Title
Bohn, Jan Helge Committee Chair
Baird, Donald G. Committee Member
Sturges, Robert H. Committee Member
Keywords
  • vector
  • partition
  • parallel deposition
  • FDM
Date of Defense 2008-02-01
Availability unrestricted
Abstract
Fused Deposition Modeling is a rapid prototyping technique in which miniature extruders melt filaments of polymeric materials. The extruder is mounted to an X/Y stage, and a computer controls the machine so that the polymer is deposited in only the appropriate locations. Material is deposited on one layer at a time so that the desired shape is built from the bottom up. While Fused Deposition Modeling has many advantages, it is poorly suited for large parts or for parts with thick walls due to the amount of time that is required to fabricate them. One strategy to reduce the build time is to implement multiple independent extrusion-heads. This thesis addresses various issues and concerns that arise while designing a multiple independent extrusion-head Fused Deposition Modeling system. The greatest design challenges and most critical issues are identified, and then solutions are presented. Physical samples and experiments verify feasibility when possible. Suitable material deposition strategies have been formulated to allow multiple independent extrusion heads to work simultaneously to reduce build time while allowing for a larger build envelope. These strategies produce parts that have nearly identical mechanical properties as those made on a single-head machine. This work seeks to provide information that is useful for designing a multiple independent extrusion-head Fused Deposition Modeling, regardless the number of extrusion heads or machine configuration. Implementing multiple independent extrusion heads will greatly reduce the fabrication time while allowing for a larger build envelope.
Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Thesis5.pdf 14.82 Mb 01:08:36 00:35:17 00:30:52 00:15:26 00:01:19

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.