Type of Document Master's Thesis Author James, Christian Monje URN etd-02222006-134938 Title Finite Element Modeling and Exploration of Double Hearing Protection Systems Degree Master of Science Department Mechanical Engineering Advisory Committee
Advisor Name Title West, Robert L. Jr. Committee Chair Homma, Kenji Committee Member Saunders, William R. Committee Member Keywords
- Finite element analysis
- double hearing protection
Date of Defense 2006-02-10 Availability unrestricted AbstractNoise levels in modern industrial and military environments are constantly increasing, requiring the improvement of current hearing protection devices. The improvement of passive hearing protection devices lies in examining the performance of major contributors to reduction of noise attenuation. The finite element method can be used to fully explore single hearing protection (SHP) and double hearing protection (DHP) systems, and the major performance mechanisms can be observed numerically as well as visually in modern postprocessing software.
This thesis focuses on developing and evaluating double hearing protection finite element models, and exploring the behavior mechanisms responsible for reduced noise attenuation. The double hearing protection model studied consists of an earmuff preloaded to a barrier covered to simulate human flesh, and a foam earplug installed inside a rigid cylinder designed to simulate the human ear canal. Pressure readings are taken at the bottom of the simulated ear canal assembly. Advanced finite element models are used to reconcile differences between the experimental and finite element results, and to investigate the behavior of the modeled system.
The foam earplug material properties for the finite element model are required in the same shear state of stress and boundary condition configuration as the experimental DHP setup, therefore a novel material extraction method is used to obtain this data. The effects of radial compression preload on the earplugs are considered, and the resulting foam earplug shear material properties are input into the finite element DHP model where the effects of the updated foam material properties are observed.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access Christian_M_James_Thesis.pdf 1.88 Mb 00:08:42 00:04:28 00:03:55 00:01:57 00:00:10
If you have questions or technical problems, please Contact DLA.