Type of Document	Dissertation
Author	Jiang, Wen
URN	etd-03032008-141234
Title	Simulations of Indentation at Continuum and Atomic levels
Degree	PhD
Department	Engineering Science and Mechanics
Advisory Committee	Advisor Name Title Batra, Romesh C. Committee Chair Case, Scott W. Committee Member Farkas, Diana Committee Member Hyer, Michael W. Committee Member Librescu, Liviu Committee Member Lin, Tao Committee Member
Keywords	continuum equivalence nanoindentation analytical solution FCC load-displacement relation atomic simulation Cylindrical contact
Date of Defense	2008-01-29
Availability	unrestricted
Abstract The main goal of this work is to determine values of elastic constants of orthotropic, transversely isotropic and cubic materials through indentation tests on thin layers bonded to rigid substrates. Accordingly, we first use the Stroh formalism to provide an analytical solution for generalized plane strain deformations of a linear elastic anisotropic layer bonded to a rigid substrate, and indented by a rigid cylindrical indenter. The mixed boundary-value problem is challenging since the deformed indented surface of the layer contacting the rigid cylinder is unknown a priori, and is to be determined as a part of the solution of the problem. For a rigid parabolic prismatic indenter contacting either an isotropic layer or an orthotropic layer, the computed solution is found to compare well with solutions available in the literature. Parametric studies have been conducted to delimit the length and the thickness of the layer for which the derived relation between the axial load and the indentation depth is valid. We then derive an expression relating the axial load, the indentation depth, and the elastic constants of an orthotropic material. This relation is specialized to a cubic material (e.g., an FCC single crystal). By using results of three virtual (i.e., numerical) indentation tests on the same specimen oriented differently, we compute values of the elastic moduli, and show that they agree well with their expected values. The technique can be extended to other anisotropic materials. We review the literature on relations between deformations at the atomic level and stresses and strains defined at the continuum level. These are then used to compare stress and strain distributions in mechanical tests performed on atomic systems and their equivalent continuum structures. Whereas averaged stresses and strains defined in terms of the overall deformations of the atomic system match well with those derived from the continuum description of the body, their local spatial distributions differ.
Files	Filename       Size       Approximate Download Time (Hours:Minutes:Seconds)     28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access    wjiang_dissertation.pdf 978.41 Kb 00:04:31 00:02:19 00:02:02 00:01:01 00:00:05

If you have questions or technical problems, please Contact DLA.