Title page for ETD etd-03042009-041243


Type of Document Master's Thesis
Author Edwards, Joseph Richard
URN etd-03042009-041243
Title Equilibrium moisture content measurement for porous building materials at various temperatures
Degree Master of Science
Department Mechanical Engineering
Advisory Committee
Advisor Name Title
Thomas, William C. Committee Chair
Pierce, Felix J. Committee Member
Scott, Elaine P. Committee Member
Keywords
  • building materials
  • temperature effect
Date of Defense 1996-05-05
Availability restricted
Abstract

Sorption isotherms and scanning data were obtained for three test materials at three different temperatures. These data resulted from further investigating the operating range of an existing experimental apparatus and procedure. During the course of the research, the operating range and control of the existing apparatus were extended, and its temperature range was tested for the first time.

The apparatus is composed of a small test chamber, which is capable of containing from one to six test samples, and an external forced-air relative humidity and temperature conditioning system. The conditioning system maintains test chamber relative humidity and temperature, as directed by a GW-BASIC computer program. Sample moisture content is gravimetrically determined in situ. The system can maintain dry-bulb temperatures between 10 C and 70 C. At room temperature, the apparatus can maintain relative humidities between o and 90 per cent. Low temperature set points have a significantly lower maximum relative humidity range as a result of the fonnation of condensation in the concentric tube counterflow heat exchanger. High temperature set points are also severely limited, due to the formation of condensation in the test chamber during data collection.

Sorption isotherms were measured for oriented strand board, fiber board sheathing, and exterior grade plywood over the relative humidity range limits at 12 C, 25 C, and 55 C. Scanning curves were measured from the 50 per cent relative humidity set points on the adsorption and desorption curves of the 25 C isotherms.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
[VT] LD5655.V855_1996.E393.pdf 16.24 Mb 01:15:09 00:38:39 00:33:49 00:16:54 00:01:26
[BTD] next to an author's name indicates that all files or directories associated with their ETD are accessible from the Virginia Tech campus network only.

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.