Title page for ETD etd-03172002-151608


Type of Document Dissertation
Author Bandorawalla, Tozer Jamshed
URN etd-03172002-151608
Title Micromechanics-Based Strength and Lifetime Prediction of Polymer Composites
Degree PhD
Department Engineering Science and Mechanics
Advisory Committee
Advisor Name Title
Case, Scott W. Committee Chair
Reifsnider, Kenneth L. Committee Co-Chair
Davis, Richey M. Committee Member
Hendricks, Scott L. Committee Member
Telionis, Demetri P. Committee Member
Keywords
  • Creep
  • Static Fatigue
  • Model Composite
  • Monte Carlo Simulations
  • Rupture
  • Unidirectional Composite
Date of Defense 2002-02-25
Availability unrestricted
Abstract
With the increasing use of composite materials for diverse applications ranging from civil infrastructure to offshore oil exploration, the durability of these materials is an important issue. Practical and accurate models for lifetime will enable engineers to push the boundaries of design and make the most efficient use of composite materials, while at the same time maintaining the utmost standards of safety. The work described in this dissertation is an effort to predict the strength and rupture lifetime of a unidirectional carbon fiber/polymer matrix composite using micromechanical techniques. Sources of material variability are incorporated into these models to predict probabilistic distributions for strength and lifetime. This approach is best suited to calculate material reliability for a desired lifetime under a given set of external conditions.

A systematic procedure, with experimental verification at each important step, is followed to develop the predictive models in this dissertation. The work begins with an experimental and theoretical understanding of micromechanical stress redistribution due to fiber fractures in unidirectional composite materials. In-situ measurements of fiber stress redistribution are made in macromodel composites where the fibers are large enough that strain gages can be mounted directly onto the fibers. The measurements are used to justify and develop a new form of load sharing where the load of the broken fiber is redistributed only onto the nearest adjacent neighbors. The experimentally verified quasi-static load sharing is incorporated into a Monte Carlo simulation for tensile strength modeling. Very good agreement is shown between the predicted and experimental strength distribution of a unidirectional composite.

For the stress-rupture models a time and temperature dependent load-sharing analysis is developed to compute stresses due an arbitrary sequence of fiber fractures. The load sharing is incorporated into a simulation for stress rupture lifetime. The model can be used to help understand and predict the role of temperature in accelerated measurement of stress-rupture lifetimes. It is suggested that damage in the gripped section of purely unidirectional specimens often leads to inaccurate measurements of rupture lifetime. Hence, rupture lifetimes are measured for [90/0_3]_s carbon fiber/polymer matrix specimens where surface 90 deg plies protect the 0 deg plies from damage. Encouraging comparisons are made between the experimental and predicted lifetimes of the [90/0_3]_s laminate. Finally, it is shown that the strength-life equal rank assumption is erroneous because of fundamental differences between quasi-static and stress-rupture failure behaviors in unidirectional polymer composites.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  tozeretd.pdf 3.07 Mb 00:14:11 00:07:18 00:06:23 00:03:11 00:00:16

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.