Title page for ETD etd-03172004-125608


Type of Document Dissertation
Author Brown, Nicole Robitaille
Author's Email Address nrb10@psu.edu
URN etd-03172004-125608
Title Understanding the Role of N-Methylolacrylamide (Nma) Distribution in Poly(Vinyl Acetate) Latex Adhesives
Degree PhD
Department Wood Science and Forest Products
Advisory Committee
Advisor Name Title
Frazier, Charles E. Committee Co-Chair
Loferski, Joseph R. Committee Co-Chair
Dillard, John G. Committee Member
Gibson, Harry W. Committee Member
Kamke, Frederick A. Committee Member
Keywords
  • N-methylolacrylamide
  • NMA
  • 13C 15N-NMA
  • 15N-NMA
  • poly(vinyl acetate)
  • PVAc
  • emulsion polymerization
  • monomer distribution
  • durability
  • solution NMR
  • fracture mechanics
  • wood adhesives
  • 13C-NMA
Date of Defense 2003-12-11
Availability unrestricted
Abstract
This work addresses the distribution of N-methylolacrylamide (NMA) units in crosslinking poly(vinyl acetate) (PVAc) adhesives. In this case, distribution refers to the three potential locations of polymerized NMA units in a latex: the water-phase, the surface of polymer particles, and the core of the polymer particles. The objective is to identify the distribution of NMA in three latices and to determine whether NMA distribution correlates with durability related performance. NMA distribution was studied via a series of variable temperature solution NMR experiments, while the durability-related performance was studied via mode I fracture mechanics tests.

Studying the distribution of NMA required the use of isotopically labeled NMA. Both 15N-NMA and 13C, 15N-NMA were synthesized. Three NMA/vinyl acetate (VAc) latices were prepared. The NMA feed strategy was varied during each of the three emulsion copolymerizations. Latex characterization methods including differential scanning calorimetry (DSC), rheometry, particle size analysis, and scanning electron microscopy (SEM) were used to study the three latices.

The solution NMR method to identify NMA distribution was performed on untreated latices and on washed latices. Washing techniques included membrane dialysis and centrifugation. Results revealed that the three latices had different NMA distributions, and that the distributions were related to the expected differences in microstructure. Latex 3 had ~ 80% core-NMA, while Latex 2 had ~ 80% surface-NMA. Latex 1 had a high proportion of surface-NMA (~60%), but also had the highest proportion of water-phase NMA (~ 20%). This high proportion of water-phase NMA could be responsible for the unique morphology Latex 1 exhibited in SEM studies.

Mode I opening fracture mechanics studies were used to study adhesive performance. Specimens were analyzed after exposure to accelerated aging treatments. Latex 2 and Latex 3 exhibited very similar results, despite having very different NMA distributions. All three latices showed good durability related performance. In Latex 2 and Latex 3, the critical strain energy release rates (Gc) after accelerated aging treatments were statistically the same as the Gc of the control specimens. The most interesting finding was that the Latex 1 Gc values were significantly higher after accelerated aging. Latex 1 also had the highest proportion of water-phase NMA. Bondline images and SEM micrographs both indicated that the integrity of Latex 1 was least affected by the accelerated aging treatments.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  DISS-FINAL-NO-CH-4-GOOD.pdf 29.91 Mb 02:18:27 01:11:12 01:02:18 00:31:09 00:02:39

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.