Title page for ETD etd-03302010-020243


Type of Document Master's Thesis
Author Eaton, James Allen
URN etd-03302010-020243
Title Effect of temperature and percent cold work on the mechanical properties of aluminum alloy 3104
Degree Master of Science
Department Materials Science and Engineering
Advisory Committee
Advisor Name Title
Reynolds, William T. Jr. Committee Chair
Gordon, Ronald S. Committee Member
Halley, William G. Committee Member
Keywords
  • Aluminum alloys
Date of Defense 1992-09-05
Availability restricted
Abstract

The effect of fourth pass cold reduction and final anneal temperature were investigated for aluminum alloy 3104. The material was received at 0.019" (82% reduction) and further reduced to: 84%, 86%, 88%, and 89%. The material was then heated for 2 hours between 85°C and 160°C.

Samples were uniaxially tensile tested at 0.0167 per second for yield strength, ultimate strength, and total percent elongation. Samples showed an increase in ductility with increasing temperature. This is believed to be the result of recovery. Prior processing limited the possibility that age hardening effects would occur. No age hardening was found. TEM micrographs showed no evidence for the presence of GP zones or the S' Al2CuMg metastable phase.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
[VT] LD5655.V851_1992.E286.pdf 2.65 Mb 00:12:15 00:06:18 00:05:30 00:02:45 00:00:14
[BTD] next to an author's name indicates that all files or directories associated with their ETD are accessible from the Virginia Tech campus network only.

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.