Title page for ETD etd-04162010-155547


Type of Document Dissertation
Author Hopkins, Andrew
Author's Email Address anhopki2@vt.edu
URN etd-04162010-155547
Title Fluid Dynamics and Surface Pressure Fluctuations of Two-Dimensional Turbulent Boundary Layers Over Densely Distributed Surface Roughness
Degree PhD
Department Aerospace and Ocean Engineering
Advisory Committee
Advisor Name Title
Simpson, Roger L. Committee Chair
Devenport, William J. Committee Member
Mason, William H. Committee Member
Neu, Wayne L. Committee Member
Schetz, Joseph A. Committee Member
Keywords
  • von Karman Constant
  • Skin Friction
  • Boundary Layer
  • Turbulence
  • Surface Pressure Fluctuations
  • Laser Doppler Velocimetry
  • Surface Roughness
Date of Defense 2010-02-09
Availability unrestricted
Abstract
Measurements were made in two-dimensional zero pressure gradient turbulent boundary layers over 5 geometries of three-dimensional densely distributed surface roughness. A 3-velocity component laser Doppler velocimeter was used to measure instantaneous velocities. These measurements permitted an independent estimate of skin friction on the surfaces using a momentum balance approach, and the validity of the von Karman constant for rough walls was tested. Five roughness fetches were evaluated: three sandpaper roughness fetches of varying grit size and two cases of uniformly distributed hemispheres of different spacing. Optical surface profilometry was used to characterize the geometry of the sandgrain surfaces.

It was found that the smooth wall von Karman constant can not be assumed for densely distributed rough wall flows in order to determine the skin friction for these flows. This requires an independent measure of skin friction using more than a single boundary layer profile. Near wall flow structure measurements found that the hemispherical elements do not have high TKE or Reynolds shearing stress regions at the trailing edge of elements as had been shown for sparsely spaced cylindrical elements. This is likely due to the sharp trailing corner of the cylindrical elements, as opposed to an effect of spacing. Rather, hemispherical roughness has a periodically occurring high stress and TKE region located between two element centers in the stream-wise direction at a height of approximately 1.5 times the roughness element height. The periodic nature of the near wall flow extends to approximately 4 roughness element heights. The traditional roughness function f(λ) did not correlate well with λ or the modified Λ for the experimental data. However, it was found that the friction coefficient for the current dense roughness cases is a constant 0.004, within the experimental uncertainty. Traditional inner wall scalings, outer wall scalings, and roughness scalings were not able to collapse surface pressure fluctuation spectra for the various rough wall surfaces tested. However, the data do collapse for individual geometries based on Reynolds number. This gives rise to the ability to predict pressure fluctuation spectra at other Reynolds numbers.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Hopkins_AMR_D_2010.pdf 8.17 Mb 00:37:50 00:19:27 00:17:01 00:08:30 00:00:43

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.