Title page for ETD etd-04212011-132859


Type of Document Master's Thesis
Author Podosinov, Volodymyr Sergiyovich
Author's Email Address v_podosinov@vt.edu
URN etd-04212011-132859
Title A Hybrid DSP and FPGA System for Software Defined Radio Applications
Degree Master of Science
Department Electrical and Computer Engineering
Advisory Committee
Advisor Name Title
Manteghi, Majid Committee Chair
Davis, William A. Committee Member
Schaumont, Patrick Robert Committee Member
Keywords
  • fpga
  • sdr
  • software defined radio
  • C64x+
  • bit error rate testing
  • dsp
Date of Defense 2011-04-07
Availability unrestricted
Abstract
Modern devices provide a multitude of services that use radio frequencies in continual smaller packages. This size leads to an antenna used to transmit and receive information being usually very inefficient and a lot of power is wasted just to be able to transmit a signal. To mitigate this problem a new antenna was introduced by Dr. Manteghi that is capable of working efficiently across a large band. The antenna achieves this large band by doing quick frequency hopping across multiple channels. In order to test the performance of this antenna against more common antennas, a software radio was needed, such that tested antennas can be analyzed using multiple modulations.

This paper presents a software defined radio system that was designed for the purpose of testing the bit-error rate of digital modulations schemes using described and other antennas. The designed system consists of a DSP, an FPGA, and commercially available modules. The combination allows the system to be flexible with high performance, while being affordable. Commercial modules are available for multiple frequency bands and capable of fast frequency switching required to test the antenna. The DSP board contains additional peripherals that allows for more complex projects in the future. The block structure of the system is also very educational as each stage of transmission and reception can be tested and observed.

The full system has been constructed and tested using simulated and real signals. A code was developed for communication between commercial modules and the DSP, bit error rate testing, data transmission, signal generation, and signal reception. A graphical user interface (GUI) was developed to help user with information display and system control. This thesis describes the software-defined-radio design in detail and shows test results at the end.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Podosinov_VS_T_2011.pdf 4.28 Mb 00:19:48 00:10:11 00:08:54 00:04:27 00:00:22
  Podosinov_VS_T_2011_Copyright.pdf 609.29 Kb 00:02:49 00:01:27 00:01:16 00:00:38 00:00:03

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.