Title page for ETD etd-04232001-174756


Type of Document Dissertation
Author Cox, Steven Scott
Author's Email Address stcox2@vt.edu
URN etd-04232001-174756
Title Modeling Diffusion-Controlled Emissions of Volatile Organic Compounds from Building Materials
Degree PhD
Department Civil Engineering
Advisory Committee
Advisor Name Title
Little, John C. Committee Chair
Dietrich, Andrea M. Committee Member
Hughes, J. Martin Committee Member
Marand, Eva Committee Member
Zhao, Dongye Committee Member
Keywords
  • PVC
  • VOC
  • vinyl flooring
  • modeling
  • indoor
  • diffusion
  • emission
Date of Defense 2001-03-29
Availability unrestricted
Abstract
The adverse effects of contaminated outdoor air have been recognized and subject to control for many years. More recently environmental engineers and health professionals have become cognizant of the hazards associated with contaminated indoor air. It is now understood that contaminated indoor air negatively impacts human health, worker productivity, and physical property.

Volatile organic compounds (VOCs) are a common class of indoor air pollutants. Building materials such as treated wood, pressed-wood products, wallboard, sealants, adhesives, floor coverings, and paints can be sources of VOC emissions. The knowledge-base necessary to develop effective solutions to indoor air quality problems requires an understanding of the emissions behavior of indoor materials.

Environmental chambers are often utilized to characterize indoor material as sources of VOC emissions to indoor air. Chamber studies, although expensive and time consuming, can be utilized to provide estimates of the rates at which a particular material emits VOCs under a specific set of environmental conditions. By fitting curves to emissions data obtained through chamber studies, VOC emissions models have been constructed. These models are frequently empirical and as a consequence, 1) apply only to the specific material and environmental conditions investigated, 2) provide little understanding of the source/sink characteristics of the material, and 3) provide little knowledge of the mass transfer processes governing emissions behavior. As a result, our understanding of the mechanisms that control VOC emissions from indoor materials remains rudimentary.

Physically-based models that describe the emissions characteristics of building materials would greatly facilitate the process of improving indoor air quality. Evidence exists suggesting well-established fundamental mass transfer mechanisms govern emissions from indoor materials. Of the various mechanisms governing emissions behaviors, diffusion appears to be one of the most significant.

The primary objective of this research was to demonstrate that the VOC emissions source behavior of a diffusion-controlled homogenous building material could be predicted using a mechanistic mathematical model. A commercial grade sheet vinyl flooring (VF) was selected for study because VF is present in many residential and commercial buildings, is relatively homogenous, and has been shown to emit hazardous organic chemicals. If successful, this research would demonstrate that the proposed strategy could be generalized to other VOC sources using appropriately constructed mathematical models.

Satisfying the research objective required development of a physically-based model to predict gas-phase VOC concentrations resulting from exposure to a diffusion-controlled material. Key parameters for this model are the solid-phase diffusion coefficient, D; the solid/air partition coefficient, K; and the initial solid-phase VOC concentration, C0.

D and K have been previously quantified for only a few indoor materials and methods for determining C0 are rudimentary. Therefore, this research project required development and execution of methods for quantifying D, K, and C0. D and K were quantified using a recording microbalance. C0 was evaluated using a new technique of cryogenic milling followed by fluidized bed desorption.

The model was validated by exposing a VF sample in an environmental chamber and directly measuring gas-phase VOC concentrations resulting from mass transfer from the solid material. Further model validation was achieved by directly measuring the VOC concentration profiles after exposure in environmental chambers. Because the key model parameters were quantified independently of chamber studies, the model validation process provided a rigorous test of the validity of the mass transfer model in particular and of the source characterization strategy in general.

The results of this research contribute to our understanding of the fundamental mechanisms that govern emissions of VOCs from vinyl flooring and provide a sound theoretical foundation for characterization of a wide range of other sources of indoor VOCs. This understanding could facilitate product reformulation strategies aimed at preventing or reducing indoor air contamination. Mass transfer models could also be utilized to develop standards for the environmental performance of indoor materials. The proposed approach will prove useful in conjunction with broader studies on sick building syndrome to identify sources that may have a critical impact on the health and comfort of building occupants.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  ETDCox.pdf 980.25 Kb 00:04:32 00:02:20 00:02:02 00:01:01 00:00:05

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.