Title page for ETD etd-04252003-110442


Type of Document Dissertation
Author Ko, Yan-Yee Andy
Author's Email Address yako@vt.edu
URN etd-04252003-110442
Title The Multidisciplinary Design Optimization of a Distributed Propulsion Blended-Wing-Body Aircraft
Degree PhD
Department Aerospace and Ocean Engineering
Advisory Committee
Advisor Name Title
Mason, William H. Committee Chair
Grossman, Bernard M. Committee Member
Haftka, Raphael T. Committee Member
Kapania, Rakesh K. Committee Member
Schetz, Joseph A. Committee Member
Keywords
  • Jet Wing
  • Distributed Propulsion
  • Jet Flap
  • Blended-Wing-Body
  • Multidisciplinary Design Optimization
  • Aircraft Design
Date of Defense 2003-04-14
Availability unrestricted
Abstract
The purpose of this study is to examine the multidisciplinary design optimization (MDO) of a distributed propulsion blended-wing-body (BWB) aircraft. The BWB is a hybrid shape resembling a flying wing, placing the payload in the inboard sections of the wing. The distributed propulsion concept involves replacing a small number of large engines with many smaller engines. The distributed propulsion concept considered here ducts part of the engine exhaust to exit out along the trailing edge of the wing.

The distributed propulsion concept affects almost every aspect of the BWB design. Methods to model these effects and integrate them into an MDO framework were developed. The most important effect modeled is the impact on the propulsive efficiency. There has been conjecture that there will be an increase in propulsive efficiency when there is blowing out of the trailing edge of a wing. A mathematical formulation was derived to explain this. The formulation showed that the jet ‘fills in’ the wake behind the body, improving the overall aerodynamic/propulsion system, resulting in an increased propulsive efficiency.

The distributed propulsion concept also replaces the conventional elevons with a vectored thrust system for longitudinal control. An extension of Spence’s Jet Flap theory was developed to estimate the effects of this vectored thrust system on the aircraft longitudinal control. It was found to provide a reasonable estimate of the control capability of the aircraft.

An MDO framework was developed, integrating all the distributed propulsion effects modeled. Using a gradient based optimization algorithm, the distributed propulsion BWB aircraft was optimized and compared with a similarly optimized conventional BWB design. Both designs are for an 800 passenger, 0.85 cruise Mach number and 7000 nmi mission. The MDO results found that the distributed propulsion BWB aircraft has a 4% takeoff gross weight and a 2% fuel weight. Both designs have similar planform shapes, although the planform area of the distributed propulsion BWB design is 10% smaller. Through parametric studies, it was also found that the aircraft was most sensitive to the amount of savings in propulsive efficiency and the weight of the ducts used to divert the engine exhaust.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Ko_Dissertation_03.pdf 22.45 Mb 01:43:56 00:53:27 00:46:46 00:23:23 00:01:59

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.