Title page for ETD etd-04252005-095515


Type of Document Dissertation
Author Zhou, Jinghai
Author's Email Address jhzhou@vt.edu
URN etd-04252005-095515
Title High Frequency, High Current Density Voltage Regulators
Degree PhD
Department Electrical and Computer Engineering
Advisory Committee
Advisor Name Title
Lee, Fred C. Committee Chair
Boroyevich, Dushan Committee Member
Lindner, Douglas K. Committee Member
Lu, Guo-Quan Committee Member
van Wyk, Daan Committee Member
Keywords
  • voltage regulator module
  • current-tripler
  • coupling inductors
  • self-driven
Date of Defense 2005-04-22
Availability unrestricted
Abstract
As a very special DC-DC converter, VRM (Voltage Regulator Module) design must follow the fast-developing trend of microprocessors. The design challenges are the high current, high di/dt, and stringent load-line requirement. When the energy is transferred from the input of a VRM, through the VRM, then through the power delivery path to the processor, it needs sufficient capacitors to relay this energy. The capacitors’ number appears to be unrealistically large if we follow today’s approach for the future processors. High frequency VRM with high control bandwidth can solve this problem, however, the degradation of efficiency makes the conventional buck converter and the hard-switching isolated topologies incapable of operating at higher frequency. The research goal is to develop novel means that can help a high-output- current VRM run efficiently at high frequency.

A novel Complementary Controlled Bridge (CCB) self-driven concept is proposed. With the proposed self-driven scheme, the combination of the ZVS technique and the self-driven technique recycles the gate driving energy by making use of the input capacitor of the secondary- side synchronous rectifier (SR) as the snubber capacitor of the primary-side switches. Compared to the external driver, the proposed converter can save driving loss and synchronous rectifier body diode conduction loss. Additionally, compared to the existing level-shifted self-driven scheme for bridge-type symmetrical topologies, its gate signal ringing is small and suitable for high-frequency applications.

Although the CCB self-driven VRM reduces the switching frequency-related losses significantly, the conduction loss is still high. Inspired by the current-doubler concept, a novel ZVS current-tripler DC-DC converter is proposed in this work. By utilizing more SR devices to share the current during the freewheeling period, the SR conduction loss is reduced. The current-tripler DC-DC converter has a delta/delta connected transformer that can be implemented with integrated magnetics. The transformer then becomes an integrated magnetic with distributed windings, which is preferred in high current applications. The current-tripler DC-DC converter in fact meets the requirements for the CCB self-driven scheme. The two concepts are then combined with an integrated gate drive transformer.

The proposed CCB self-driven concept and current-tripler concept can both be applied to the 12V non-isolated VRMs. The proposed topology is basically a buck-derived soft-switching topology with duty cycle extension and SR device self-driven capabilities. Because there is no isolation requirement, the SR gate driving becomes so simple that the voltage at the complementary controlled bridge can be used to directly drive the SR gate. Both the gate driving loss and the SR body diode conduction loss are reduced. The proposed circuit achieves similar overall efficiency to a conventional 300kHz buck converter running at 1MHz.

All the circuits proposed in this dissertation can use coupling inductors to improve both the steady-state efficiency and dynamic performances. The essence of the coupling inductors concept is to provide different equivalent inductances for the steady state and the transient. Moreover, when a current loop becomes necessary to achieve proper current sharing among phases, the current loop sample hold effect will make it difficult to push the bandwidth. The sample hold effect is alleviated by the coupling inductors concept. A small-signal model is proposed to study the system dynamic performance difference with different coupling inductor designs. As the verification, the coupling concept is applied to the 12V non-isolated CCB self-driven VRM and the bandwidth as high as one third of the switching frequency is achieved, which means a significant output capacitor reduction.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  ETD_final_submit.pdf 4.19 Mb 00:19:22 00:09:58 00:08:43 00:04:21 00:00:22

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.