Title page for ETD etd-05032001-113913


Type of Document Dissertation
Author Boyer, Keith Michael
URN etd-05032001-113913
Title An Improved Streamline Curvature Approach for Off-Design Analysis of Transonic Compression Systems
Degree PhD
Department Mechanical Engineering
Advisory Committee
Advisor Name Title
O'Brien, Walter F. Jr. Committee Chair
Davis, Milton W. Jr. Committee Member
Hale, Alan A. Committee Member
King, Peter S. Committee Member
Ng, Fai Committee Member
Rabe, Douglas C. Committee Member
Keywords
  • gas turbine engine
  • compressor analysis
  • compressor design
Date of Defense 2001-04-09
Availability unrestricted
Abstract
A streamline curvature (SLC) throughflow numerical model was assessed and modified to better approximate the flow fields of highly transonic fans typical of military fighter applications. Specifically, improvements in total pressure loss modeling were implemented to ensure accurate and reliable off-design performance prediction. The assessment was made relative to the modeling of key transonic flow field phenomena, and provided the basis for improvements, central to which was the incorporation of a physics-based shock loss model. The new model accounts for shock geometry changes, with shock loss estimated as a function of inlet relative Mach number, blade section loading (flow turning), solidity, leading edge radius, and suction surface profile. Other improvements included incorporation of loading effects on the tip secondary loss model, use of radial blockage factors to model tip leakage effects, and an improved estimate of the blade section incidence at which minimum loss occurs.

Data from a single-stage, isolated rotor and a two-stage, advanced-design (low aspect ratio, high solidity) fan provided the basis for experimental comparisons. The two-stage fan was the primary vehicle used to verify the present work. Results from a three-dimensional, steady, Reynolds-averaged Navier-Stokes model of the first rotor of the two-stage fan were also used to compare with predicted performance from the improved SLC representation.

In general, the effects of important flow phenomena relative to off-design performance of the fan were adequately captured. These effects included shock loss, secondary flow, and spanwise mixing. Most notably, the importance of properly accounting for shock geometry and loss changes with operating conditions was clearly demonstrated. The majority of the increased total pressure loss with loading across the important first-stage tip region was shown to be the result of increased shock loss, even at part-speed. Overall and spanwise comparisons demonstrated that the improved model gives reasonable performance trends and generally accurate results, indicating that the physical understanding of the blade effects and the flow physics that underlie the loss model improvements are correct and realistic. The new model is unique in its treatment of shock losses, and is considered a significant improvement for fundamentally based, accurate throughflow numerical approximations.

The specific SLC model used here is employed in a novel numerical approach – the Turbine Engine Analysis Compressor Code (TEACC). With implementation of the improved SLC model and additional recommendations presented within this report, the TEACC method offers increased potential for accurate analysis of complex, engine-inlet integration issues, such as time-variant inlet distortion.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  dissertation_final.pdf 6.01 Mb 00:27:48 00:14:18 00:12:30 00:06:15 00:00:32

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.