Title page for ETD etd-05042010-140910


Type of Document Dissertation
Author Lu, Yang
URN etd-05042010-140910
Title Atomistic Characterization and Modeling of the Deformation and Failure Properties of Asphalt-Aggregate Interface
Degree PhD
Department Civil Engineering
Advisory Committee
Advisor Name Title
Wang, Linbing Committee Chair
Filz, George M. Committee Member
Puri, Ishwar K. Committee Member
Sotelino, Elisa D. Committee Member
Keywords
  • Atomistic Modeling
  • Asphalt
  • Interface
  • Forcefield
  • Aggregate
Date of Defense 2010-04-20
Availability unrestricted
Abstract
This dissertation is dedicated to develop models and methods to bridge atomistic and continuum scales of deformation processes in asphalt-aggregate interfacial composite materials systems. The deformation and failure behaviors, e.g. nanoscale strength, deformation, stiffness, and adhesion/cohesion at asphalt-aggregate interfaces are all evaluated by means of atomistic simulations. The atomistic modeling approach is employed to simulate mechanical properties, which is connected by their common dependence on the nanoscale bonding and their sensitive dependences on mechanics and moisture sensitivity. Specifically, CVFF-aug forcefield is employed in the atomistic calculations to study the fundamental failure processes that appear at the interface as a result of a mechanical deformation. There are five primary aspects to this dissertation.

First, the multiscale features of asphalt concrete materials are characterized by using nanoscale characterization & fabrication devices, e.g. High Resolution Optical Microscope (HROM), Environmental Scanning Electron Microscope (ESEM), Transmission Electron Microscope (TEM), Focused Ion Beam (FIB), and Atomistic Force Microscope (AFM).

Second, based on the multiscale devices characterization of the interfaces, a 2-layer atomistic bitumen-rock interface structure is constructed. Interface structure evolution under uniaxial tension is performed with various deformation rates. Comparison is made between both theoretical and experimental characterizations of interface configuration. Molecular dynamics (MD) simulations are used to investigate potential relationships between interface structure and morphology. Influences of deformation rate and temperature factors are discussed in terms of interface region stress-strain relation and loading time duration.

Third, molecular dynamics simulations are also performed to provide a characterization of atomic scale mechanical behaviors for a 3-layer confined shear structure which leads to interfacial shear failure. In addition, atomistic static simulation approach is employed to calculate a couple of mineral crystals’ elastic constants. Furthermore, molecular dynamics simulations are also used to predict the static, thermodynamic, and mechanical properties of three asphalt molecular models.

Fourth, the high performance parallel computing technology is extensively employed throughout this dissertation. In addition to use the large-scale MD program, LAMMPS, the author developed a high performance parallel distributive computing program, MPI_multistress, to implement the multiscale understanding/predicting of materials mechanical behaviors.

Finally, this research also focuses on the evaluation of the susceptibility of aggregates and asphalts to moisture damage through understanding the nano-mechanisms that influence adhesive bond between aggregates and asphalt, as well as the cohesive strength and moisture susceptibility of the specific asphalt-aggregate interfaces. Surface energy theory and pull-out simulation are used to compute the adhesive bond strength between the aggregates and asphalt, as well as the cohesive bond strength within the binder.

In general, this dissertation has focused on the development of nanoscale modeling methods to assess asphalt-aggregate interfacial atomistic deformation and failure behaviors, as well as moisture effects on asphalt mixture strength. Simulation results provide valuable insights into mechanistic details of nanoscale interactions, particularly under conditions of various deformation rates and different temperatures. The results obtained show that a reasonable agreement between the theoretical and pavement industry observations is satisfactory. We conclude that the theoretical calculations presented here are useful in asphalt concrete industry for predicting the mechanical properties of asphalt-aggregate interfaces, which are difficult to obtain experimentally because of their small size.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Lu_Y_D_2010.pdf 11.42 Mb 00:52:51 00:27:11 00:23:47 00:11:53 00:01:00

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.