Title page for ETD etd-05262000-09210036


Type of Document Master's Thesis
Author Neely, William Douglas
URN etd-05262000-09210036
Title Evaluation of the In-Servic Performance of the Tom's Creek Bridge
Degree Master of Science
Department Civil Engineering
Advisory Committee
Advisor Name Title
Cousins, Thomas E. Committee Chair
Barker, Richard M. Committee Member
Lesko, John J. Committee Member
Keywords
  • deflection control
  • dynamic load allowance
  • bridge design
  • Composite materials
  • pultruded structural beam
  • wheel load distribution
  • fiber-reinforced polymer (FRP)
  • bridge rehabilitation
Date of Defense 2000-05-15
Availability unrestricted
Abstract
The Tom's Creek Bridge is a small-scale demonstration project involving the use of fiber-reinforced polymer (FRP) composite girders as the main load carrying members. The project is intended to serve two purposes. First, by calculating bridge design parameters such as the dynamic load allowance, transverse wheel load distribution and deflections under service loading, the Tom's Creek Bridge will aid in modifying current AASHTO bridge design standards for use with FRP composite materials. Second, by evaluating the FRP girders after being exposed to service conditions, the project will begin to answer questions about the long-term performance of these advanced composite material beams when used in bridge design.

This thesis details the In-Service analysis of the Tom's Creek Bridge. Five load tests, at six month intervals, were conducted on the bridge. Using mid-span strain and deflection data gathered from the FRP composite girders during these tests the above mentioned bridge design parameters have been determined. The Tom's Creek Bridge was determined to have a dynamic load allowance, IM, of 0.90, a transverse wheel load distribution factor, g, of 0.101 and a maximum deflection of L/488.

Two bridge girders were removed from the Tom's Creek Bridge after fifteen months of service loading. These FRP composite girders were tested at the Structures and Materials Research Laboratory at Virginia Tech for stiffness and ultimate strength and compared to pre-service values for the same beams. This analysis indicates that after fifteen months of service, the FRP composite girders have not lost a significant amount of either stiffness or ultimate strength.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Neelythesis.pdf 3.95 Mb 00:18:18 00:09:24 00:08:14 00:04:07 00:00:21

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.