Title page for ETD etd-06042004-121921


Type of Document Master's Thesis
Author Schimann, Hubert C. R.
Author's Email Address hcrschimann@yahoo.com
URN etd-06042004-121921
Title Force and Energy Measurement of Bubble-Particle Detachment
Degree Master of Science
Department Mining and Minerals Engineering
Advisory Committee
Advisor Name Title
Yoon, Roe-Hoan Committee Chair
Adel, Gregory T. Committee Member
Luttrell, Gerald H. Committee Member
Novak, Thomas Committee Member
Keywords
  • contact angle hysteresis
  • bubble-particle detachment
  • octadecyltrichlorosilane
  • cetyltrimethylammonium bromide
  • coarse particle flotation
Date of Defense 2004-05-27
Availability unrestricted
Abstract
Possibilities for increasing the upper limit of floatable particle sizs in the froth flotation process have been examined since the early beginnings of mineral flotation. The economic implications of such an incresae are far ranging; from decreased grinding costs and increased recoveries to simplified flow-sheet design and increased throughput, all leading to increased revenue. Bubble-particle detachment has been studied to better understand the factors influencing the strength of attachment and the energies involved. Direct measurements of bubble particle detachment were performed using a hanging balance apparatus (KSV Sigma 70 tensiometer) and using a submerged hydrophobic plate in water. Three experiments were used; direct force measurement of bubble-particle detachment, detachment force and energy of a bubble from a submerged hydrophobic plate, and detachment force and energy of a cetyltrimethylammonium bromide coated silica sphere from a flat bubble. Octadecyltrichlorosilane was used as a hydrophobic coating in the first two experimental methods. These experiments were recorded with a CCD camera to identify the detachment processes involved. Energies for both methods were calculated and divided into the two main steps of the detachment process: Three-Phase-Contact pinning and three phase contact line sliding. The first step represents the energy barrier which must be overcome before detachment can begin. It is directly related to contact angle hysteresis. Detachment occurs during the second step, where the solid-vapor interface is replaced by solid-liquid and liquid-vapor. This step corresponds to the work of adhesion. The effects of surface tension, contact angle and hysteresis were well demonstrated with the three experimental methods. Good correlation was found between theoretical work of adhesion and measured energies.
Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Thesis_ETD.pdf 2.59 Mb 00:12:00 00:06:10 00:05:24 00:02:42 00:00:13

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.