Title page for ETD etd-06062008-172207


Type of Document Dissertation
Author Baker, Kenneth R.
URN etd-06062008-172207
Title Importance sampling simulation of free-space optical APD pulse position modulation receivers
Degree PhD
Department Electrical Engineering
Advisory Committee
Advisor Name Title
Pratt, Timothy J. Committee Chair
Bostian, Charles W. Committee Member
Graybeal, Jack D. Committee Member
Jacobs, Ira Committee Member
Krainak, Michael Committee Member
Keywords
  • Pulse-code modulation.
Date of Defense 1993-05-09
Availability unrestricted
Abstract
Free-space optical communication technology has many advantages over RF /microwave in satellite and other spacecraft applications where reductions in size, weight and prime power requirements are combined with increased data transfer capability over long distances. Ultimately, the design and implementation of free-space optical communication systems is dependent on suitable analysis of the link. The analysis of these systems is difficult due to the complicated time-varying propagation of optical energy over the free-space channel. This difficulty is combined with a shortage of suitable analytical expressions for adequately determining the performance of free-space optical receivers. As the link must be modeled and analyzed, simulation of the free-space optical communication link can initiate the process of exploring the application of lightwave technology to the free-space channel. A prohibitive amount of time is required to simulate receiver bit error rate (BER) performance at the low error rates of interest. This dissertation presents the results achieved in reducing the amount of time required to simulate, to a given accuracy, the bit error rate performance of an APD based free-space optical receiver.

An improved technique for the importance sampling simulation of direct detection APD receivers has been developed. Two methods for efficiently simulating and biasing the probability distribution function of the APD process are presented and discussed. This is the first use the Webb, Mcintyre, Conradi statistics in importance sampling simulation of an APD. The general procedure for applying importance sampling to the optical communication system simulation problem is presented in detail. The technique of importance sampling has been extended to include the simulation of maximum likelihood optical M-ary PPM receivers, an optical receiver relevant to free-space applications. The use of importance sampling is shown to reduce the time required to simulate M-PPM APD receivers by several orders of magnitude, from 9000 years to less than one hour in one example.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  LD5655.V856_1993.B349.pdf 9.71 Mb 00:44:56 00:23:06 00:20:13 00:10:06 00:00:51
[BTD] next to an author's name indicates that all files or directories associated with their ETD are accessible from the Virginia Tech campus network only.

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.