

Type of Document Master's Thesis Author Dody, Joseph W. URN etd-06102012-040156 Title Study of biomass combustion characteristics for the development of a catalytic combustor/gasifier Degree Master of Science Department Mechanical Engineering Advisory Committee
Advisor Name Title Jaasma, Dennis R. Committee Chair Leonard, Robert G. Committee Member Reinholtz, Charles F. Committee Member Keywords
- Biomass energy
Date of Defense 1985-10-05 Availability restricted Abstract The research reported here explored, a "new" approach to biomassenergy conversion for small-scale process heat-applications. The conversion process uses close-coupled catalytic. combustion to burn combustibles in effluent generated by primary combustion or gasification of biomass fuels. Computer control of primary and secondary air flow rates allow control of the devices output power while maintaining fuel-lean or stoichiometric conditions in the effluent entering the catalytic combustion zone. The intent of the secondary combustion system is to ensure "clean" exhaust (i.e., promote complete combustion).
A small-scale combustor/gasifier was built and instrumented.
Characteristics of combustion were studied for three biomass fuels so
that primary and secondary air flow control strategies could be devised. A bang-bang type controller was devised for primary air flow
control. Secondary air as controlled based on feedback signals from an inexpensive automobile exhaust gas oxygen sensor. The control strategies and catalytic combustion were implemented on prototype combustor/gasifier and the device was tested with good results.
Power turn down ratios of 4 to 1 and 3 to 1 were achieved. The
zitconia-type automobile exhaust gas oxygen sensors adapted well to the combustion environment of biomass fuel, at least for short periods (long term durability tests were not conducted). The secondary air control system was able to maintain fuel-lean flows for the most part and, the secondary combustion system provided reductions of approximately three fourths in carbon monoxide emissions.
Files
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access LD5655.V855_1985.D629.pdf 8.88 Mb 00:41:06 00:21:08 00:18:29 00:09:14 00:00:47 next to an author's name indicates that all files or directories associated with their ETD are accessible from the Virginia Tech campus network only.
If you have questions or technical problems, please Contact DLA.