Title page for ETD etd-06122006-162052


Type of Document Dissertation
Author Rappold, Patrick Matthew
Author's Email Address prappold@vt.edu
URN etd-06122006-162052
Title Activity-based product costing in a hardwood sawmill through the use of discrete-event simulation
Degree PhD
Department Wood Science and Forest Products
Advisory Committee
Advisor Name Title
Bond, Brian H. Committee Co-Chair
Kline, D. Earl Committee Co-Chair
Shewchuk, John P. Committee Member
Smith, Robert L. Committee Member
Wiedenbeck, Janice K. Committee Member
Keywords
  • discrete-event simulation
  • product costing
  • activity-based costing
  • hardwood sawmill
Date of Defense 2006-06-02
Availability unrestricted
Abstract
The purpose of this research was to quantify the impact of the log variables: length, grade, and scaling diameter, on the cost of producing hardwood lumber, using the activity-based costing technique. The usual technique of calculating hardwood lumber product costs is based upon traditional cost accounting, where manufacturing costs are allocated to the products based upon the volume of each product that is produced. With the traditional cost accounting procedure, the variation in the resources used to process the logs is not taken into consideration. As a result, when the cost to manufacture the products is subtracted from the market value of the products, the resulting profit levels of the products may not be truly representative of the actual resources consumed in manufacturing the product.

Using discrete-event simulation, two hardwood sawmills were modeled and a series of experiments were conducted which would not have been feasible to conduct on the mill floors. Results from the simulation experiments illustrated that the activity-based and traditional cost accounting techniques allocated different amounts of manufacturing costs to the products. The largest difference between the two cost accounting techniques was found to be the amount of raw material costs allocated to the products. For one of the sawmills modeled, log grade was identified as having the greatest influence on determining product costs and total manufacturing costs. Results from the model of the second sawmill however demonstrated that log diameter had a greater impact on determining product costs and total manufacturing costs. The commonality of the results from the two simulation models was that the differences in the volume of lumber produced, between the logs that were studied, was a critical component in determining which log parameter had the most effect on changing the dynamics of the sawmill system.

To enable hardwood managers a more precise method of allocating raw material costs to the lumber products, a methodology was developed that uses the principles of activity-based costing to allocate raw material costs. The proposed methodology, termed the lumber yield method, uses lumber yield values from logs with similar characteristics to allocate raw material costs to the lumber products. Analysis of the output from the simulation models illustrated that with the lumber yield method, the amount of raw material costs allocated to the products was not significantly different than the amount allocated by the activity-based costing method. The calculated raw material costs of the products were however, found to be significantly different between the lumber yield method and the traditional volume costing method.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Instructions_for_the_simulation_models.txt 0.52 Kb < 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01
  Rappold_Dissertation.pdf 2.44 Mb 00:11:17 00:05:48 00:05:05 00:02:32 00:00:13
  SIMAN_code_for_model_of_the_large_volume_sawmill.txt 266.08 Kb 00:01:13 00:00:38 00:00:33 00:00:16 00:00:01
  SIMAN_code_for_the_model_of_the_medium_volume_sawmill.txt 131.78 Kb 00:00:36 00:00:18 00:00:16 00:00:08 < 00:00:01
  Simulation_Models.zip 11.17 Mb 00:51:42 00:26:35 00:23:15 00:11:37 00:00:59

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.