Type of Document Master's Thesis Author Asproudas, Spelios A. URN etd-06122010-020116 Title Finite element analysis for consolidation of multilayered and anisotropic soils. Degree Master of Science Department Civil Engineering Advisory Committee
Advisor Name Title Desai, C. S. Committee Chair Hunter, J. H. Committee Member Walker, Richard D. Committee Member Keywords
- soil mechanics
Date of Defense 1975-05-05 Availability restricted Abstract
The purpose of this study was to present an analysis for predicting the magnitude and rate of settlement and the magnitude of the pore water pressure during consolidation of linear elastic soils by using the finite element method. The formulation of the method is based on a variational principle.
The numerical characteristics of the method for one- and two-dimensional problems in plane strain were examined and the results were presented in graphical form to illustrate the effect of mesh refinement. Other factors examined in 2-D problems were the effect on the results of Poisson's ratio v, the relative distance to the boundary, and the time increment.
For multilayered soil systems a parametric study was made. The effects of wide variations in material properties on the consolidation process and general criteria for reliable results using the FE formulation were derived o A three-layered system was used for the parametric study on the material parameters. The method was applied to four layer field problem and the results were found to be reasonable.
Permeability and strength anisotropy and their effect on the rate of consolidation were examined for a homogeneous soil under a strip footing.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access LD5655.V855_1975.A845.pdf 1.83 Mb 00:08:29 00:04:22 00:03:49 00:01:54 00:00:09next to an author's name indicates that all files or directories associated with their ETD are accessible from the Virginia Tech campus network only.
If you have questions or technical problems, please Contact DLA.