Type of Document	Dissertation
Author	Gilbert, John Leslie
URN	etd-06122010-020740
Title	Optimization parameters for a membrane polygonal body of revolution with zero meridional stress and its application to parachutes.
Degree	PhD
Department	Aerospace Engineering
Advisory Committee	Advisor Name Title Lutze, Frederick H. Jr. Committee Chair Cliff, Eugene M. Committee Member Frederick, Daniel Committee Member Johnson, Harry Lee Committee Member Weisshaar, Terence A. Committee Member
Keywords	parachute design
Date of Defense	1974-06-15
Availability	restricted
Abstract A polygonal body of revolution consisting of discrete meridional members joined by regular polygons is optimized for maximum drag and drag coefficient. The meridional, or primary members, carryall of the radial loads and the membrane structure transfers applied pressure loads to the primary members. The shape of the secondary membrane is found such that the performance index is optimized. Several methods are utilized to solve for the optimum conditions, and an application of these solutions to a parachute design is shown. The results are presented in parametric form with pressure distributions, structural flexibility, and skirt closure angle being the parameters investigated. In general, the results verified experimental data in several areas and that the current shapes used in design cover the optimum region, although refinements could be made in some areas. Of particular significance is the difference in shape for optimum drag and drag coefficient. For maximum drag force, the fullness or the lobing between meridional members should be a maximum throughout the span of the gore, whereas, for the maximum drag coefficient design, the lobing is a minimum in the region near the vent and gradually increases as the meridional distance increases. It was found that the pressure distribution influences the optimum design. For a typical distribution that increases as the meridional distance increases, the gore width should be increased near the skirt for an optimum drag coefficient. Parameter studies show that by increasing the secondary structure flexibility the drag increases, although it is a secondary effect for present designs. A well-known parameter in optimum parachute design is the suspension line length, and this study verifies that increasing the length improves the drag. Optimum conditions are found by use of the maximum principle, steepest descent, and the Rayleigh-Ritz method.
Files	Filename       Size       Approximate Download Time (Hours:Minutes:Seconds)     28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access  LD5655.V856_1974.G55.pdf 2.75 Mb 00:12:44 00:06:33 00:05:44 00:02:52 00:00:14 next to an author's name indicates that all files or directories associated with their ETD are accessible from the Virginia Tech campus network only.

If you have questions or technical problems, please Contact DLA.