Type of Document Dissertation Author Shen, Wei URN etd-07132006-114120 Title Design of High-density Transformers for High-frequency High-power Converters Degree PhD Department Electrical and Computer Engineering Advisory Committee
Advisor Name Title Boroyevich, Dushan Committee Co-Chair Wang, Fei Fred Committee Co-Chair Liu, Yilu Committee Member Lu, Guo-Quan Committee Member van Wyk, Jacobus Daniel Committee Member Keywords
- Leakage inductance calculation
- High power density
- High-frequency Transformer
- Core loss calculation
- Transformer optimal design
Date of Defense 2006-07-13 Availability unrestricted AbstractMoore's Law has been used to describe and predict the blossom of IC industries, so increasing the data density is clearly the ultimate goal of all technological development. If the power density of power electronics converters can be analogized to the data density of IC's, then power density is a critical indicator and inherent driving force to the development of power electronics. Increasing the power density while reducing or keeping the cost would allow power electronics to be used in more applications.
One of the design challenges of the high-density power converter design is to have high-density magnetic components which are usually the most bulky parts in a converter. Increasing the switching frequency to shrink the passive component size is the biggest contribution towards increasing power density. However, two factors, losses and parasitics, loom and compromise the effect. Losses of high-frequency magnetic components are complicated due to the eddy current effect in magnetic cores and copper windings. Parasitics of magnetic components, including leakage inductances and winding capacitances, can significantly change converter behavior. Therefore, modeling loss and parasitic mechanism and control them for certain design are major challenges and need to be explored extensively.
In this dissertation, the abovementioned issues of high-frequency transformers are explored, particularly in regards to high-power converter applications. Loss calculations accommodating resonant operating waveform and Litz wire windings are explored. Leakage inductance modeling for large-number-of-stand Litz wire windings is proposed. The optimal design procedure based on the models is developed.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access Draft_after_ETD_Review.pdf 5.65 Mb 00:26:08 00:13:26 00:11:45 00:05:52 00:00:30
If you have questions or technical problems, please Contact DLA.