Title page for ETD etd-07242000-15060006


Type of Document Dissertation
Author Gómez, Jesús Emilio
Author's Email Address jgomez@vt.edu
URN etd-07242000-15060006
Title Development of an extended hyperbolic model for concrete-to-soil interfaces
Degree PhD
Department Civil Engineering
Advisory Committee
Advisor Name Title
Filz, George M. Committee Chair
Brandon, Thomas L. Committee Member
Duncan, James Michael Committee Member
Kapania, Rakesh K. Committee Member
Martin, James R. II Committee Member
Keywords
  • interface element
  • backfill inundation
  • unloading-reloading
  • data normalization
  • hyperbolic parameter
  • concrete
  • yield surface
  • staged shear
  • interface model
  • hydrocompression
  • interface testing
  • sand
  • yielding
Date of Defense 2000-07-19
Availability unrestricted
Abstract
Development of an Extended Hyperbolic Model for Concrete-to-Soil Interfaces

by

Jesús E. Gómez

Dr. George M. Filz, Chairman

Via Department of Civil Engineering

ABSTRACT

Placement and compaction of the backfill behind an earth retaining wall may induce a vertical shear force at the soil-to-wall interface. This vertical shear force, or downdrag, is beneficial for the stability of the structure. A significant reduction in construction costs may result if the downdrag is accounted for during design. This potential reduction in costs is particularly interesting in the case of U.S. Army Corps of Engineers lock walls.

A simplified procedure is available in the literature for estimating the downdrag force developed at the wall-backfill interface during backfilling of a retaining wall. However, finite element analyses of typical U.S. Army Corps of Engineers lock walls have shown that the magnitude of the downdrag force may decrease during operation of the lock with a rise in the water table in the backfill. They have also shown that pre- and post-construction stress paths followed by interface elements often involve simultaneous changes in shear and normal stresses and unloading-reloading. The hyperbolic formulation for interfaces (Clough and Duncan 1971) is accurate for modeling the interface response in the primary loading stage under constant normal stress. However, it has not been extended to model simultaneous changes in shear and normal stresses or unloading-reloading of the interface.

The purpose of this research was to develop an interface model capable of giving accurate predictions of the interface response under field loading conditions, and to implement this model in a finite element program. In order to develop the necessary experimental data, a series of tests were performed on interfaces between concrete and two different types of sand. The tests included initial loading, staged shear, unloading-reloading, and shearing along complex stress paths.

An extended hyperbolic model for interfaces was developed based on the results of the tests. The model is based on Clough and Duncan (1971) hyperbolic formulation, which has been extended to model the interface response to a variety of stress paths. Comparisons between model calculations and tests results showed that the model provides accurate estimates of the response of interfaces along complex stress paths. The extended hyperbolic model was implemented in the finite element program SOILSTRUCT-ALPHA, used by the U.S. Army Corps of Engineers for analyses of lock walls.

A pilot-scale test was performed in the Instrumented Retaining Wall (IRW) at Virginia Tech that simulated construction and operation of a lock wall. SOILSTRUCT-ALPHA analyses of the IRW provided accurate estimates of the downdrag magnitude throughout inundation of the backfill. It is concluded that the extended hyperbolic model as implemented in SOILSTRUCT-ALPHA is adequate for routine analyses of lock walls.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  01TITLE.pdf 4.71 Kb 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01
  02abstract.pdf 6.97 Kb 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01
  03contents.pdf 59.98 Kb 00:00:16 00:00:08 00:00:07 00:00:03 < 00:00:01
  04chapter1.pdf 90.21 Kb 00:00:25 00:00:12 00:00:11 00:00:05 < 00:00:01
  05chapter2.pdf 216.65 Kb 00:01:00 00:00:30 00:00:27 00:00:13 00:00:01
  06chapter3.pdf 1.85 Mb 00:08:34 00:04:24 00:03:51 00:01:55 00:00:09
  07chapter4.pdf 2.27 Mb 00:10:29 00:05:23 00:04:43 00:02:21 00:00:12
  08chapter5.pdf 683.48 Kb 00:03:09 00:01:37 00:01:25 00:00:42 00:00:03
  09chapter6.pdf 34.83 Kb 00:00:09 00:00:04 00:00:04 00:00:02 < 00:00:01
  10referen.pdf 23.30 Kb 00:00:06 00:00:03 00:00:02 00:00:01 < 00:00:01
  AppendixA.pdf 139.15 Kb 00:00:38 00:00:19 00:00:17 00:00:08 < 00:00:01
  AppendixB.pdf 436.51 Kb 00:02:01 00:01:02 00:00:54 00:00:27 00:00:02
  AppendixC.pdf 649.48 Kb 00:03:00 00:01:32 00:01:21 00:00:40 00:00:03
  AppendixD.pdf 176.22 Kb 00:00:48 00:00:25 00:00:22 00:00:11 < 00:00:01
  AppendixE.pdf 128.56 Kb 00:00:35 00:00:18 00:00:16 00:00:08 < 00:00:01
  AppendixF.pdf 22.62 Kb 00:00:06 00:00:03 00:00:02 00:00:01 < 00:00:01
  VITA.pdf 4.72 Kb 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.