Type of Document	Master's Thesis
Author	Bhargave, Ashutosh Sadashiva
URN	etd-07282010-020012
Title	Forced convection heat transfer from extended surfaces with finned pins
Degree	Master of Science
Department	Mechanical Engineering
Advisory Committee	Advisor Name Title Hsu, S. T. Committee Chair Jones, James R. Committee Member Wood, Henry L. Committee Member
Keywords	Heat
Date of Defense	1965-09-05
Availability	restricted
Abstract It has been shown that by increasing the film coefficient "h" by means of forced convection the heat transfer rate of a finned pin can be considerably improved. For an average flow rate of air over the extended surfaces, throughout the investigation the increase in the effectiveness was as much as 4.60 times over the free convection process. However the effectiveness decreases with the increasing root excess temperatures. The heat loss through the insulation was about 1.86 percent, which will not impair the accuracy for engineering applications.
Files	Filename       Size       Approximate Download Time (Hours:Minutes:Seconds)     28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access  LD5655.V855_1965.B427.pdf 6.30 Mb 00:29:09 00:14:59 00:13:07 00:06:33 00:00:33 next to an author's name indicates that all files or directories associated with their ETD are accessible from the Virginia Tech campus network only.

If you have questions or technical problems, please Contact DLA.