Title page for ETD etd-08032009-170244


Type of Document Dissertation
Author Zhao, Xin
Author's Email Address zhaox@vt.edu
URN etd-08032009-170244
Title Electropolishing of Niobium in Sulfuric Acid-Methanol Electrolytes: Development of Hydrofluoric Acid-Free Electrolytes
Degree PhD
Department Materials Science and Engineering
Advisory Committee
Advisor Name Title
Corcoran, Sean Gerald Committee Chair
Kelley, Michael J. Committee Co-Chair
Aning, Alexander O. Committee Member
Edwards, Marc A. Committee Member
Reynolds, William T. Jr. Committee Member
Keywords
  • sulfuric acid-methanol
  • niobium
  • electropolishing
  • hydrofluoric acid-free
Date of Defense 2009-07-16
Availability unrestricted
Abstract
Niobium (Nb) has the highest superconducting transition temperature (9.2 K) of the pure metals, which makes it the most used material for the construction of superconducting radio frequency (SRF) accelerators. The performance of the accelerator is critically dependent upon the quality of Nb surface. Electropolishing (EP) in hydrofluoric acid (HF)-containing electrolytes is the currently accepted treatment process. The presence of HF is necessary for the removal of the passive oxide surface film formed in aqueous electrolytes. But HF is hazardous and must be contained without human exposure and eliminated in an environmentally appropriate manner.

In the present dissertation project, HF-Free EP of Nb was performed in sulfuric acid-methanol electrolytes. Sulfuric concentrations of 0.1 M, 0.5 M, 1 M, 2 M, and 3 M were used. Cyclic voltammetry and potential hold experiments were performed in cells of both two-electrode and three-electrode setups to evaluate the electrochemical process. The influence of electrolyte concentration, temperature, and EP duration was investigated. At room temperature, both the corrosion rate and the surface quality obtained were comparable to those currently obtained with HF-based processing. With decreasing temperature, the mean current level decreased and the surface quality improved substantially. For a desired average material removal of 100 μm, nanometer scale surface roughness was obtained under multiple conditions.

Mechanism of EP was also investigated by electrochemical impedance spectroscopy (EIS). The EIS diagram indicates the presence of a compact film during EP at mass transport controlled limiting current and a film-free surface during EP at ohmic controlled current. Transfer from a film-free surface to an anodic film precipitation with decreasing temperature was also observed. Microsmoothing is only achieved under mass transport control. Nb5+ ions are determined to be the mass transport limiting species.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Dissertation_Xin_Zhao.pdf 7.84 Mb 00:36:17 00:18:39 00:16:19 00:08:09 00:00:41

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.