Title page for ETD etd-08082012-154538


Type of Document Master's Thesis
Author Stroop, Richard Henry Lee
URN etd-08082012-154538
Title Enhancing GNU Radio for Run-Time Assembly of FPGA-Based Accelerators
Degree Master of Science
Department Electrical and Computer Engineering
Advisory Committee
Advisor Name Title
Athanas, Peter M. Committee Chair
Dietrich, Carl B. Committee Member
Patterson, Cameron D. Committee Member
Keywords
  • FPGA
  • SDR
  • qFlow
  • GNU Radio
Date of Defense 2012-08-07
Availability unrestricted
Abstract
Software defined radios (SDRs) have changed the paradigm of slowly designing custom ra- dios, instead allowing designers to quickly iterate designs with a large range of functionality. With the help of environments like the open-source project, GNU Radio, a designer can prototype radios with greatly improved productivity. Unfortunately, due to software per- formance limitations, there is no way to achieve the range of radio designs made possible with actual physical radio hardware. In order for SDRs to become more prevalent in radio prototyping and development, accelerators must be added to high-throughput and computa- tionally intensive portions. Custom DSPs, GPUs, and FPGAs have all been added to SDRs to try and expand their computational capabilities. One difficulty in this is that by adding these accelerators, the “instant gratification” dynamic of the GNU Radio is lost.

In this thesis, an enhanced GNU Radio flow is presented that seamlessly augments the GNU Radio software-only model with FPGAs, yet preserves the GNU Radio dynamics by providing full-custom radio hardware/software structures in seconds. By delegating portions of a GNU Radio flow graph to networked FPGAs, a larger class of software-defined radios can be implemented. Assembly of the signal processing structures within the FPGAs is accomplished using an enhanced flow where modules are customized, placed, and routed in a fraction of the time required by the vendor tools. With rapid FPGA assembly, a GNU Radio designer retains the ability to perform “what-if” experiments, which in turn greatly enhances productivity.

Due to the modular nature of GNU Radio and of the FPGA designs, a modular assembly of the FPGA hardware is used. In the flow presented here, optimized hardware library components are designed by a domain expert, and stored as compact placed-and-routed modules. When a designer requests the assembly of one or more components within a given FPGA via a GNU Radio Python script, the necessary library components are accessed and translated to an appropriate location within the chip. Then the ports of the modules are stitched together using a custom FPGA router. This process reduces the large compile times of hardware for an FPGA to reasonable software-like times.

To the radio designer, the complexity of the underlying hardware is abstracted away, making it appear as if everything compiles and runs in software, allowing many iterations to be realized quickly. Radio design can continue at the speeds that GNU Radio designers are accustomed to but with the range of possible waveforms and general functionality extended.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Stroop_RHL_T_2012.pdf 5.19 Mb 00:24:02 00:12:21 00:10:49 00:05:24 00:00:27

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.