Title page for ETD etd-08152002-212736


Type of Document Master's Thesis
Author Schniepp, Timothy John
URN etd-08152002-212736
Title Design Manual Development for a Hybrid, FRP Double-Web Beam and Characterization of Shear Stiffness in FRP Composite Beams
Degree Master of Science
Department Engineering Science and Mechanics
Advisory Committee
Advisor Name Title
Lesko, John J. Committee Chair
Case, Scott W. Committee Member
Roberts-Wollmann, Carin L. Committee Member
Keywords
  • hybrid composite beam
  • shear lag
  • Composite materials
  • shear deformation
  • FRP
  • kGA
  • pultruded structural shapes
  • shear stiffness
Date of Defense 2002-08-02
Availability unrestricted
Abstract
Fiber-reinforced polymeric (FRP) composites are being considered for structural members in bridge construction as lighter, more durable alternatives to steel and concrete. Extensive testing and analysis of a pultruded, hybrid double web beam (DWB) developed for use in bridge construction has been conducted at Virginia Tech. A primary purpose of this testing is the development of a structural design guide for the DWB, which includes stiffness and strength data. The design manual also includes design allowables determined through a statistical analysis of test data.

Static testing of the beams, including failure tests, has been conducted in order to determine such beam properties as bending modulus, shear stiffness, failure mode, and ultimate capacity. Measuring and calculating the shear stiffness has proven to be an area of particular interest and difficulty. Shear stiffness is calculated using Timoshenko beam theory which combines the shear stiffness and shear area together along with a shear correction factor, k, which accounts for the nonuniform distribution of shear stress/strain through the cross-section of a structure. There are several methods for determining shear stiffness, kGA, in the laboratory, including a direct method and a multi-span slope method. Herein lays the difficulty as it has been found that varying methods produces significantly different results. One of the objectives of current research is to determine reasons for the differences in results, to identify which method is most accurate in determining kGA, and also to examine other parameters affecting the determination of kGA that may further aid the understanding of this property.

This document will outline the development of the design guide, the philosophy for the selection of allowables and review and discuss the challenges of interpreting laboratory data to develop a complete understanding of shear effects in large FRP structural members.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  thesis(corrected).pdf 2.49 Mb 00:11:30 00:05:55 00:05:10 00:02:35 00:00:13

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.