Type of Document Master's Thesis Author Mettanurak, Thammarat Author's Email Address email@example.com URN etd-08272008-150214 Title Effect of Minimum Suppression and Maximum Release Years on Compression Parallel to Grain Strength and Specific Gravity for Small-sized Yellow-poplar (Liriodendron tulipifera L.) Specimens Degree Master of Science Department Wood Science and Forest Products Advisory Committee
Advisor Name Title Zink-Sharp, Audrey G. Committee Chair Loferski, Joseph R. Committee Co-Chair Copenheaver, Carolyn A. Committee Member Zedaker, Shepard M. Committee Member Keywords
- ring width
- tree rings
- suppression years
- ultimate crushing strength
- compression parallel to grain
- Liriodendron tulipifera L.
- increment core
- release years
- wood specific gravity
- radial growth averaging technique
Date of Defense 2008-04-04 Availability unrestricted AbstractSeveral researchers have concluded that there is little or no relationship between specific gravity and ring width or growth rate in yellow-poplar (Liriodendron tulipifera L.). Because most mechanical properties of wood are also closely related to specific gravity, it would thus be of interest to learn how minimum suppression and maximum release years—evidence that can be extracted from radial growth patterns based on a modified radial growth averaging (RGA) technique—influence the compression parallel to grain strength and specific gravity of wood.
This study is designed to evaluate the effects of growth suppression and release on ultimate crushing stress and specific gravity for small-sized yellow-poplar specimens. Additionally, the relationship between specific gravity and ultimate crushing stress is investigated.
Twenty-three yellow-poplar cores were examined for their growth ring widths. Minimum suppression and maximum release years were identified based on the modified RGA criteria method. From each increment core, three 1 × 1 × 4 mm specimens from both minimum suppression and maximum release years were tested for their ultimate crushing stresses using a micro-mechanical test system. The specific gravity of each specimen was also recorded. These data were analyzed using a paired samples t test and a simple linear regression.
The results indicate that the mean ultimate crushing stress and specific gravity of maximum release years were significantly higher than that of minimum suppression years. Furthermore, the ultimate crushing stress was linearly related to the specific gravity of the specimens.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access Thesis.pdf 4.49 Mb 00:20:48 00:10:41 00:09:21 00:04:40 00:00:23
If you have questions or technical problems, please Contact DLA.