Title page for ETD etd-09042007-162640


Type of Document Dissertation
Author Zhao, Jun
URN etd-09042007-162640
Title Silicon-Based RFIC Multi-band Transmitter Front Ends for Ultra-Wideband Communications and Sensor Applications
Degree PhD
Department Electrical and Computer Engineering
Advisory Committee
Advisor Name Title
Raman, Sanjay Committee Chair
Athanas, Peter M. Committee Member
Bostian, Charles W. Committee Member
Buehrer, Richard Michael Committee Member
Guido, Louis J. Committee Member
Keywords
  • Mixer
  • VCO
  • UWB
  • PLL
Date of Defense 2007-03-27
Availability unrestricted
Abstract
Fully integrated Ultra-Wideband (UWB) RFIC transmitters are designed in Si-based technologies for applications such as wireless communications or sensor networks. UWB technology offers many unique features such as broad bandwidth, low power, accurate position location capabilities, etc. This research focuses on the RFIC front-end hardware design issues for proposed UWB transmitters. Two different methods of multiband frequency generation ----- using switched capacitor VCO tanks and frequency mixing with single sideband mixers ----- are explored in great detail. To generate the required UWB signals, pulse generators are designed and integrated into the transmitter chips.

The first prototype UWB transmitter is designed in Freescale Semiconductor 0.18μm SiGe BiCMOS technology for operation over three 500 MHz bands at center frequencies of 4.6/6.4/8.0 GHz, and generates pulses supporting differential BPSK modulation. The transmitter output frequency is controlled by a two-bit code which sets the state of a switched capacitor tank array for coarse tuning of the VCO. While selecting between the different bands, the transmitter is capable of settling and re-transmitting in less than 0.7μs using an integrated, wide band phase-locked loop (PLL). Various issues such as mismatch/inaccuracy of the pulses and high power consumption of the prescaler were identified during the first design and were addressed in subsequent design revisions.

The pulse generator is a critical part of the proposed UWB transmitter. The initial pulse generator design used CMOS delay lines and logic gates to synthesize the required pulse bandwidth; however this approach suffered from inaccurate pulse timing control due to delay time sensitivity to device modelling and process variations. Subsequently, a novel pulse generator design capable of achieving accurate timing control was implemented using digital logic and a fixed oscillator frequency to provide timing information, integrated into a modified transmitter circuit, and subsequently fabricated in Jazz Semiconductor's 0.18μm CA18 RFCMOS process. Experimental results confirm the generation of accurate one-nanosecond pulses.

Finally, a new multiband UWB transmitter based on a new single sideband (SSB) resistive mixer with superior linearity and zero static power consumption was also designed and fabricated using Jazz CA13 0.13μm RF CMOS process. This design is based on a fixed frequency phase-locked VCO and generates different bands through frequency mixing. In the prototype design, two additional carrier frequencies are generated from the VCO center frequency (5 GHz) by mixing it with its output divided-by-4 (1.25 GHz). By switching the relative I/Q phases of the LO/IF inputs to this single side band mixer, either the upper side band (6.25 GHz) or lower side band (3.75 GHz) frequency is selected at the mixer output, while the other sideband is rejected. Simulation results show that the transmitter is capable of generating the desired carrier frequencies while suppressing the image component by more than 40 dB.

Overall, this work has explored various aspects of UWB transmitter design and implementations in fully integrated silicon chips. The major contributions of this work include: proposed hardware architectures for pulse-based multiband UWB transmitters; implemented a fully integrated multiband UWB transmitter with embedded phase-locked switched-tank VCO capable of wide frequency tuning; demonstrated an all digital pulse generator capable of generating accurate one-nanosecond pulse trains in the presence of various mismatches; and investigated resistive SSB mixer topologies and their implementation in a multiband UWB generation architecture.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  thesis.pdf 4.95 Mb 00:22:54 00:11:47 00:10:18 00:05:09 00:00:26

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.