Title page for ETD etd-09102008-154920


Type of Document Dissertation
Author Flory IV, Isaac L.
URN etd-09102008-154920
Title High-Intensity Discharge Industrial Lighting Design Strategies for the Minimization of Energy Usage and Life-Cycle Cost
Degree PhD
Department Electrical and Computer Engineering
Advisory Committee
Advisor Name Title
Rahman, Saifur Committee Chair
Lindner, Douglas K. Committee Member
Mili, Lamine M. Committee Member
Ramu, Krishnan Committee Member
Rossi, John F. Committee Member
Keywords
  • optimization
  • model
  • maintenance
  • industrial
  • life-cycle cost
  • lighting application
  • energy usage
  • lighting
Date of Defense 2008-08-26
Availability unrestricted
Abstract
Worldwide, the electrical energy consumed by artificial lighting is second only to the amount consumed by electric machinery. Of the energy usage attributed to lighting in North America, approximately fifteen percent is consumed by those lighting products that are classified as High-Intensity Discharge (HID). These lighting products, which are dominated by Metal-Halide and High-Pressure Sodium technologies, range in power levels from 35 to 2000 watts and are used in both indoor and outdoor lighting applications, one category of which is the illumination of industrial facilities. This dissertation reviews HID industrial lighting design techniques and presents two luminaire layout algorithms which were developed to provide acceptable lighting performance based upon the minimum number of required luminaires as determined by the lumen method, regardless of the aspect ratio of the target area. Through the development of lighting design software tools based upon the Zonal Cavity Method and these layout algorithms, models for the quantification of energy requirements, lighting project life-cycle costs, and environmental impacts associated with conventional industrial lighting installations are presented. The software tools, which were created to perform indoor HID lighting designs for the often encountered application of illuminating general rectangular areas with non-sloped ceilings utilizing either High-Bay or Low-Bay luminaires, provide projections of minimal lighting system costs, energy consumption, and environmental impact based upon lamp selection, ballast selection, luminaire selection and lighting system maintenance practices. Based upon several industrial lighting application scenarios, lighting designs are presented using both the new software tools and a commercially available lighting design software package. For the purpose of validating this research, analyses of both designs for each scenario are presented complete with results of illuminance simulations performed using the commercially available software.
Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Flory_Dissertation_Final.pdf 2.33 Mb 00:10:48 00:05:33 00:04:51 00:02:25 00:00:12

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.