Title page for ETD etd-09192008-152113


Type of Document Dissertation
Author Wang, Jialin
Author's Email Address jialinw@vt.edu
URN etd-09192008-152113
Title AFM surface force measurements between hydrophobized gold surfaces
Degree PhD
Department Materials Science and Engineering
Advisory Committee
Advisor Name Title
Yoon, Roe-Hoan Committee Chair
Clark, David E. Committee Member
Gandour, Richard D. Committee Member
Hochella, Michael F. Jr. Committee Member
Walz, John Y. Committee Member
Keywords
  • AFM
  • thin film
  • gold
  • hydrophobic force
  • surface force
  • DLVO
  • water structure
  • long-range attraction
  • temperature effect
Date of Defense 2008-09-08
Availability unrestricted
Abstract
In 1982, Israelachvili and Pashley reported the first measurements of a hitherto unknown attractive force between two mica surfaces hydrophobized in cetyltrimethylammonium bromide (CTAB) solutions. Follow-up experiments conducted by many investigators confirmed their results, while others suggested that the “hydrophobic force” is an artifact due to nanobubbles (or cavitation). Evidences for the latter included the discontinuities (or steps) in the force versus distance curves and the pancake-shaped nano-bubbles seen in atomic force microscopic (AFM) images. Recent measurements conducted in degassed water showed, however, smooth force versus distance curves, indicating that the hydrophobic force is not an artifact due to nanobubbles.1, 2

Still other investigators3, 4 suggested that the long-range attraction observed between hydrophobic surfaces is due to the correlation between the patches of adsorbed ionic surfactant and the patches of unoccupied surface. For this theory to work, it is necessary that the charged patches be laterally mobile to account for the strong attractive forces observed in experiment. In an effort to test this theory, AFM force measurements were conducted with gold substrates hydrophobized by self-assembly of alkanethiols and xanthates of different chain lengths. The results showed long-range attractions despite the fact that the hydrophobizing agents chemisorb on gold and, hence, the adsorption layer is immobile.

When the gold surfaces were hydrophobized in a 1 × 10-3 M thiol-in-ethanol solution for an extended period of time, the force curves exhibited steps. These results indicate that the long-range attractions are caused by the coalescence of bubbles, as was also reported by Ederth.5 The steps disappeared, however, when the species adsorbed on top of the chemisorbed monolayer were removed by solvent washing, or when the gold substrates were hydrophobized in a 1 × 10-5 M solution for a relatively short period of time.

AFM force measurements were also conducted between gold substrates coated with short-chain thiols and xanthates to obtain hydrophobic surfaces with water contact angles () of less than 90o. Long-range attractions were still observed despite the fact that cavitation is thermodynamically not possible.

Having shown that hydrophobic force is not due to coalescence of pre-existing bubbles, cavitation, or correlation of charged patches, the next set of force measurements was conducted in ethanol-water mixtures. The attractive forces became weaker and shorter-ranged than in pure water and pure ethanol. According to the Derjaguin’s approximation6, an attractive force arises from the decrease in the excess free energy (f) of the thin film between two hydrophobic surfaces.7 Thus, the stronger hydrophobic forces observed in pure water and pure ethanol can be attributed to the stronger cohesive energy of the liquid due to stronger H-bonding. Further, the increase in hydrophobic force with decreasing separation between two hydrophobic surfaces indicates that the H-bonded structure becomes stronger in the vicinity of hydrophobic surfaces.

The force measurements conducted at different temperatures in the range of 10-40ºC showed that the hydrophobic attraction between macroscopic surfaces causes a decrease in film entropy (Sf), which confirms that the hydrophobic force is due to the structuring of water in the thin film between two hydrophobic surfaces. The results showed also that the hydrophobic interaction entails a reduction in the excess film enthalpy (Hf), which may be associated with the formation of partial (or full) clathrates formed in the vicinity of hydrophobic surfaces. The presence of the clathrates is supported by the recent finding that the density of water in the vicinity of hydrophobic surfaces is lower than in the bulk.8

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Jialin-Phd-Dissertation.pdf 1.36 Mb 00:06:17 00:03:14 00:02:49 00:01:24 00:00:07

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.