Title page for ETD etd-09212004-193506


Type of Document Dissertation
Author Hengprathanee, Songwut
Author's Email Address shengpra@vt.edu
URN etd-09212004-193506
Title Linear and Nonlinear Finite Element Analyses Of anchorage Zones in Post-Tensioned Concrete Structures
Degree PhD
Department Civil Engineering
Advisory Committee
Advisor Name Title
Roberts-Wollmann, Carin L. Committee Chair
Cousins, Thomas E. Committee Member
Ohanehi, Donatus C. Committee Member
Plaut, Raymond H. Committee Member
Wollmann, Gregor P. Committee Member
Keywords
  • Prestressed concrete
  • Finite element analysis
  • Post-tensioned
  • Anchorage zones
Date of Defense 2004-09-14
Availability unrestricted
Abstract
Linear and nonlinear finite element analyses are used for the investigation of rectangular anchorage zones with the presence of a support reaction. The investigation is conducted based on four load configurations consisting of concentric, inclined concentric, eccentric, and inclined eccentric loads. The method of model construction is illustrated thoroughly. The influence of several parameters, including anchorage ratio, inclination of prestressing load, eccentricity, magnitude of the reaction force, bearing plate ratio, and the location of the reaction force, is studied. Both graphical and numerical presentations of the results from each load configuration are given. Improved equations, which are modified from the equations presented in the AASHTO Standard Specifications (2002), are proposed. The results from the equations are compared to those from the finite element method. Nonlinear finite element analysis is used to verify the applicability of the equations and to study a new bursting steel arrangement.

Linear and nonlinear finite element analyses are also used for the study of non-rectangular anchorage zones. Four basic load configurations, including concentric, eccentric, inclined concentric, and inclined eccentric loads, are investigated. The shell element is selected for the construction of the finite element models. Several parameters, consisting of anchorage ratio, inclination of prestressing load, eccentricity, web thickness, ratio of web thickness to flange thickness, and flange width, are chosen for parametric studies. The results from the studies are presented graphically and numerically. Equations to calculate the bursting force and location of the force are developed from the Strut-and-Tie Model approach. The verification of the formulations and the investigation of bursting steel arrangement are conducted using nonlinear finite element analysis.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  SongwutHengprathaneeDissertation.pdf 3.74 Mb 00:17:17 00:08:53 00:07:47 00:03:53 00:00:19

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.