Title page for ETD etd-11052008-155513


Type of Document Master's Thesis
Author Woodworth, Michael Allen
URN etd-11052008-155513
Title Optimization of Highway Bridge Girders for Use with Ultra-High Performance Concrete (UHPC)
Degree Master of Science
Department Civil Engineering
Advisory Committee
Advisor Name Title
Roberts-Wollmann, Carin L. Committee Chair
Cousins, Thomas E. Committee Member
Sotelino, Elisa D. Committee Member
Keywords
  • Bridge
  • Girder
  • UHPC
  • Ultra High Performance Concrete
  • Optimization
Date of Defense 2008-10-22
Availability unrestricted
Abstract
Ultra High Performance Concrete (UHPC) is a class of cementitious materials that share similar characteristics including very large compressive strengths, tensile strength greater than conventional concrete and high durability. The material consists of finely graded cementitious particles and aggregates to develop a durable dense matrix. The addition of steel fibers increases ductility such that the material develops usable tensile strength. The durability and strength of UHPC makes it a desirable material for the production of highway bridge girders. However, UHPC’s unique constitutive materials make it more expensive than conventional concrete. The cost and lack of appropriate design guidelines has limited its introduction into bridge products.

The investigation presented in this thesis developed several optimization formulations to determine a suitable bridge girder shape for use with UHPC. The goal of this optimization was to develop a methodology of using UHPC in highway bridge designs that was cost competitive with conventional concrete solutions. Several surveys and field visits were performed to identify the important aspects of girder fabrication. Optimizations were formulated to develop optimized girder cross sections and full bridge design configurations that utilize UHPC. The results showed that for spans greater than 90 ft UHPC used in the proposed girder shape was more economical than conventional girders. The optimizations and surveys resulted in the development of a proposed method to utilize UHPC in highway bridges utilizing existing girder shapes and formwork. The proposed method consists of three simple calculations to transform an initial conventional design to an initial design using modified UHPC girders.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  UHPC-Girders-Thesis-Michael-Woodworth-Rev7-ETD.pdf 5.24 Mb 00:24:15 00:12:28 00:10:54 00:05:27 00:00:27

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.