Type of Document Master's Thesis Author Clements, Joshua Ryan URN etd-11272000-114011 Title THE EXPERIMENTAL TESTING OF AN ACTIVE MAGNETIC BEARING/ROTOR SYSTEM UNDERGOING BASE EXCITATION Degree Master of Engineering Department Mechanical Engineering Advisory Committee
Advisor Name Title Kasarda, Mary E. F. Committee Chair Kirk, R. Gordon Committee Member Wicks, Alfred L. Committee Member Keywords
- Magnetic Bearing Equivalent Stiffness and Damping
- Magnetic Bearing Base Excitation Modeling
Date of Defense 2000-08-25 Availability unrestricted AbstractActive Magnetic Bearings (AMB) are a relatively recent innovation in bearing technology. Unlike conventional bearings, which rely on mechanical forces originating from fluid films or physical contact to support bearing loads, AMB systems utilize magnetic fields to levitate and support a shaft in an air-gap within the bearing stator. This design has many benefits over conventional bearings. The potential capabilities that AMB systems offer are allowing this new technology to be considered for use in state-of-the-art applications. For example, AMB systems are being considered for use in jet engines, submarine propulsion systems, energy storage flywheels, hybrid electric vehicles and a multitude of high performance space applications. Many of the benefits that AMB systems have over conventional bearings makes them ideal for use in these types of vehicular applications. However, these applications present a greater challenge to the AMB system designer because the AMB-rotor system may be subjected to external vibrations originating from the vehicle's motion and operation. Therefore these AMB systems must be designed to handle the aggregate vibration of both the internal rotor dynamic vibrations and the external vibrations that these applications will produce.
This paper will focus on the effects of direct base excitation to an AMB/rotor system because base excitation is highly possible to occur in vehicular applications. This type of excitation has been known to de-stabilize AMB/rotor systems therefore this aspect of AMB system operation needs to be examined. The goal of this research was to design, build and test a test rig that has the ability to excite an AMB system with large amplitude base excitation. Results obtained from this test rig will be compared to predictions obtained from linear models commonly used for AMB analysis and determine the limits of these models.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access 2josh_clements.pdf 1.39 Mb 00:06:27 00:03:19 00:02:54 00:01:27 00:00:07
If you have questions or technical problems, please Contact DLA.