Title page for ETD etd-11302009-155602


Type of Document Dissertation
Author Baisden, Andrew Carson
Author's Email Address cbaisden@vt.edu
URN etd-11302009-155602
Title Generalized Terminal Modeling of Electro-Magnetic Interference
Degree PhD
Department Electrical and Computer Engineering
Advisory Committee
Advisor Name Title
Boroyevich, Dushan Committee Chair
Iliescu, Traian Committee Member
Riad, Sedki Mohamed Committee Member
Wang, Fei Fred Committee Member
Wang, Shuo Committee Member
Keywords
  • Terminal model
  • High frequency modeling
  • Electro-magnetic Interference (EMI)
  • Differential Mode (DM)
  • Common Mode (CM)
Date of Defense 2009-11-06
Availability unrestricted
Abstract
Terminal models have been used for various power electronic applications. In this work a two- and three-terminal black box model is proposed for electro-magnetic interference (EMI) characterization. The modeling procedure starts with a time-variant system at a particular operating condition, which can be a converter, set of converters, sub-system or collection of components. A unique, linear equivalent circuit is created for applications in the frequency domain. Impedances and current / voltage sources define the noise throughout the entire EMI frequency spectrum. All parameters needed to create the model are clearly defined to ensure convergence and maximize accuracy.

The model is then used to predict the attenuation caused by a filter with increased accuracy over small signal insertion gain measurements performed with network analyzers. Knowledge of EMI filters interactions with the converter allows for advanced techniques and design constraints to optimize the filter for size, weight, and cost. Additionally, the model is also demonstrated when the operating point of the system does not remain constant, as with AC power systems. Modeling of a varying operating point requires information of all the operating conditions for a complete and accurate model. However, the data collection and processing quickly become unmanageable due to the large amounts of data needed. Therefore, simplification techniques are used to reduce the complexity of the model while maintaining accuracy throughout the frequency spectrum.

The modeling approach is verified for linear and power electronic networks including: a dc-dc boost converter, phase-leg module, and a simulated dc-ac inverter. The accuracy of the model is confirmed up to 100 MHz in simulation and at least 50 MHz for experimental validation.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Baisden_AC_D_2009.pdf 5.42 Mb 00:25:05 00:12:54 00:11:17 00:05:38 00:00:28

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.