Type of Document Dissertation Author Waddill, Dan Wilson Author's Email Address firstname.lastname@example.org URN etd-1898-161425 Title Three-Dimensional Modeling of Solute Transport with In Situ Bioremediation Based on Sequential Electron Acceptors Degree PhD Department Civil Engineering Advisory Committee
Advisor Name Title Widdowson, Mark A. Committee Chair Cox, William E. Committee Member Loganathan, G. V. Committee Member Love, Nancy G. Committee Member Parker, Jack C. Committee Member Keywords
- contaminant transport
- sequential electron acceptors
- microbial growth
Date of Defense 1998-01-29 Availability unrestricted Abstract
A numerical model for subsurface solute transport is developed and applied to a contaminated field site. The model is capable of depicting multiple species transport in a three-dimensional, anisotropic, heterogeneous domain as influenced by advection, dispersion, adsorption, and biodegradation. Various hydrocarbon contaminants are simulated as electron donors for microbial growth, with electron acceptors utilized in the following sequence: oxygen, nitrate, Mn(IV), Fe(III), sulfate, and CO2. In addition, the model accounts for products of biodegradation such as Mn (II), Fe(II), H2S, and CH4. Biodegradation of each hydrocarbon substrate follows Monod kinetics, modified to include the effects of electron acceptor and nutrient availability. Inhibition functions permit any electron acceptor to inhibit utilization of all other electron acceptors that provide less Gibbs free energy to the microbes. The model assumes that Fe(III) and Mn(IV) occur as solid phase ions, while the other electron acceptors are dissolved in the aqueous phase. Microbial biomass is simulated as independent groups of heterotrophic bacteria that exist as scattered microcolonies attached to the porous medium. Diffusional limitations to microbial growth are assumed to be negligible.
In order to verify the accuracy of the computer code, the model was applied to simple, hypothetical test cases, and the results were compared to analytical solutions. In addition, a sensitivity analysis showed that variations in model inputs caused logical changes in output. Finally, the capabilities of the model were tested by comparing model output to observed concentrations of hydrocarbons, electron acceptors, and endproducts at a leaking UST site. The model was calibrated using historical site data, and predictive capabilities of the model were tested against subsequent sets of field data.
The model was used to examine the effect of porous media heterogeneities on contaminant transport and biodegradation. The turning bands method was used to produce hypothetical, yet realistic heterogeneous fields describing hydraulic conductivity, initial biomass concentration, and the maximum rate of substrate utilization. When the available electron acceptor concentrations were small compared to the hydrocarbon concentration, the overall rate of hydrocarbon mass loss increased with time, even as hydrocarbon concentrations decreased. This trend is the opposite of what would be predicted by a first order decay model.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access App_a.pdf 82.81 Kb 00:00:23 00:00:11 00:00:10 00:00:05 < 00:00:01 App_b.pdf 14.78 Kb 00:00:04 00:00:02 00:00:01 < 00:00:01 < 00:00:01 App_c.pdf 7.55 Kb 00:00:02 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01 Chp1.pdf 51.65 Kb 00:00:14 00:00:07 00:00:06 00:00:03 < 00:00:01 Chp2.pdf 59.01 Kb 00:00:16 00:00:08 00:00:07 00:00:03 < 00:00:01 Chp3.pdf 73.50 Kb 00:00:20 00:00:10 00:00:09 00:00:04 < 00:00:01 CHP4.PDF 460.21 Kb 00:02:07 00:01:05 00:00:57 00:00:28 00:00:02 Chp5.pdf 1.07 Mb 00:04:56 00:02:32 00:02:13 00:01:06 00:00:05 Ref_all.pdf 37.28 Kb 00:00:10 00:00:05 00:00:04 00:00:02 < 00:00:01 Vita.pdf 4.36 Kb 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01
If you have questions or technical problems, please Contact DLA.