Title page for ETD etd-5155161059611611


Type of Document Dissertation
Author Case, Scott Wayne
URN etd-5155161059611611
Title Mechanics of Fiber-Controlled Behavior in Polymeric Composite Materials
Degree PhD
Department Engineering Science and Mechanics
Advisory Committee
Advisor Name Title
Davis, Richey M.
Hendricks, Scott L.
Telionis, Demetri P.
Thangjitham, Surot
Reifsnider, Kenneth L. Committee Chair
Keywords
  • damage tolerance
  • composite materials
  • micromechanical models
  • fatigue
  • durability
  • strength prediction
  • life prediction
Date of Defense 1996-05-28
Availability unrestricted
Abstract
Modern durability and damage tolerance predictions for composite material systems rely on accurate estimates of the local stress and material states for each of the constituents, as well as the manner in which the constituents interact. In this work, an number of approaches to estimating the stress states and interactions are developed. First, an elasticity solution is presented for the problem of a penny-shaped crack in an N-phase composite material system opened by a prescribed normal pressure. The stress state around such a crack is then used to estimate the stress concentrations due to adjacent fiber fractures in a composite materials. The resulting stress concentrations are then used to estimate the tensile strength of the composite. The predicted results are compared with experimental values.

In addition, a cumulative damage model for fatigue is presented. Modifications to the model are made to include the effects of variable amplitude loading. These modifications are based upon the use of remaining strength as a damage metric and the definition of an equivalent generalized time. The model is initially validated using results from the literature. Also, experimental data from APC-2 laminates and IM7/K3B laminates are used in the model. The use of such data for notched laminates requires the use of an effective hole size, which is calculated based upon strain distribution measurements. Measured remaining strengths after fatigue loading are compared with the predicted values for specimens fatigued at room temperature and 350°F (177°C).

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  etd.pdf 6.48 Mb 00:29:59 00:15:25 00:13:29 00:06:44 00:00:34

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.