Title page for ETD etd-61898-19345


Type of Document Master's Thesis
Author Mysore, Guruprasad Jr.
Author's Email Address gpmysore@michiana.net
URN etd-61898-19345
Title Vibration Analysis of Single - Anchor Inflatable Dams
Degree Master of Science
Department Aerospace and Ocean Engineering
Advisory Committee
Advisor Name Title
Liapis, Stergios I. Committee Chair
Kapania, Rakesh K. Committee Member
Plaut, Raymond H. Committee Member
Keywords
  • finite element
  • contact analysis
  • inflatable dams
Date of Defense 1997-06-10
Availability unrestricted
Abstract

Inflatable dams are flexible, cylindrical structures anchored to a foundation. They are used for a variety of purposes, e.g. diverting water for irrigation or groundwater recharging, impounding water for recreational purposes, and raising the height of existing dams or spillways.

The vibration behavior of such dams is analyzed. Single-anchor inflatable dams with fins are considered. First, a static analysis is performed which yields the equilibrium shapes of the dam, both in the presence and absence of water. Then, a dynamic analysis is undertaken which analyzes the small vibrations of the inflatable dam about the equilibrium configuration, both in the presence of water (hydrostatic water as well as parallel flowing water) and absence of water.

The dam is modeled as an elastic shell. It is assumed to be air-inflated and resting on a rigid foundation. The cross-sectional perimeter, material thickness, modulus of elasticity, and Poisson's ratio are given. The analysis is performed for different values of internal pressure and external water heads.

Initially, the dam is assumed to lie flat. The internal pressure is then increased slowly until it reaches the desired value. Then the external water is applied and the equilibrium configuration is obtained. Small vibrations about this configuration are considered. The water is assumed to be inviscid and incompressible, and potential theory is used. The infinite-frequency limit is assumed on the free surface. A boundary element technique is utilized to determine the behavior of the water, and the finite element program ABAQUS is used to analyze the structural behavior. Both the cases of fluid at rest and flowing parallel to the dam are considered. The vibration frequencies and mode shapes are computed. The effect of the internal pressure of the dam is investigated, and the results are compared to those for the dam in the absence of external water.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  appa.PDF 8.96 Kb 00:00:02 00:00:01 00:00:01 < 00:00:01 < 00:00:01
  appb.PDF 4.12 Kb 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01
  chpt1.pdf 10.49 Kb 00:00:02 00:00:01 00:00:01 < 00:00:01 < 00:00:01
  chpt2.PDF 11.73 Kb 00:00:03 00:00:01 00:00:01 < 00:00:01 < 00:00:01
  chpt3.pdf 231.27 Kb 00:01:04 00:00:33 00:00:28 00:00:14 00:00:01
  chpt4.pdf 1.48 Mb 00:06:49 00:03:30 00:03:04 00:01:32 00:00:07
  chpt5.PDF 6.16 Kb 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01
  etd1.pdf 15.63 Kb 00:00:04 00:00:02 00:00:01 < 00:00:01 < 00:00:01
  refs.PDF 10.78 Kb 00:00:02 00:00:01 00:00:01 < 00:00:01 < 00:00:01
  vita.PDF 2.15 Kb < 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.