Scholarly
    Communications Project


Document Type:Master's Thesis
Name:Shelley Risch Porter
Email address:srisch@vt.edu
URN:1997/00546
Title:Supercritical Fluid Extraction of Nylon 6,6 Fiber Finish and Oligomers
Degree:Master of Science
Department:Chemistry
Committee Chair: Larry T. Taylor
Chair's email:ltaylor@vt.edu
Committee Members:Harry C. Dorn
John G. Dillard
Keywords:Supercritical Fluid Extraction, SFE, Fiber Finishes, Oligomers, HPLC, Mass Spectrometry
Date of defense:December 4, 1997
Availability:Release the entire work for Virginia Tech access only.
After one year release worldwide only with written permission of the student and the advisory committee chair.

Abstract:

Quantitation of the amount of finish applied during fiber manufacturing is an important industrial quality control process. Finish levels that are too low result in excessive fiber and mechanical wear. On the other hand, overly high finish levels may cause residue buildup on the processing equipment. Removal of the finish has traditionally been done with solvents such as chloroform or Freon followed by gravimetric or spectroscopic analysis of the removed material. Quantitation of low molecular weight oligomeric material is another important quality control practice for the fiber industry in that the presence of these species and their concentration affect the physical properties of the polymer. Also, excessively high concentrations of oligomers may result in residue deposits on processing equipment. Typical conventional methods for determining the concentration of oligomers present in fibers involve large quantities of organic solvent for removal of the oligomers followed by chromatographic analysis Increased government regulation of chlorinated and other solvents has led to investigations of alternate methods of extraction. Several studies have shown that supercritical fluid extraction (SFE) using carbon dioxide as the extraction fluid is an important alternative to conventional organic solvent extraction for the removal of both textile finishes and oligomeric material. This research seeks to extend the previous studies regarding the application of SFE for the quantitation of finish and oligomers from nylon 6,6 fibers. The effects of pressure, extraction temperature, modifier percentage, static extraction time, and dynamic extraction time on the supercritical fluid extraction efficiency of nylon 6,6 oligomers were examined. Results from the SFE methods for both finish and oligomer extractions were compared to results from conventional solvent extraction. The extracted oligomers were identified by HPLC with coupled on-line atmospheric pressure chemical ionization mass spectrometry (APCI-MS) and HPLC fractionation coupled with off-line Liquid Secondary Ion Mass Spectrometry (LSIMS).

List of Attached Files

etd.PDF

At the author's request, all materials (PDF files, images, etc.) associated with this ETD are accessible from the Virginia Tech network only.


The author grants to Virginia Tech or its agents the right to archive and display their thesis or dissertation in whole or in part in the University Libraries in all forms of media, now or hereafter known. The author retains all proprietary rights, such as patent rights. The author also retains the right to use in future works (such as articles or books) all or part of this thesis or dissertation.