Scholarly
    Communications Project


Document Type:Master's Thesis
Name:Hong-mei Gu
Email address:hongmeig@vt.edu
URN:1997/00308
Title:Moisture Gradient Measurement During Kiln Drying of Red Oak
Degree:Master of Science
Department:Wood Science and Forest Products
Committee Chair: Dr. Audrey G. Zink
Chair's email:agzink@vt.edu
Committee Members:Robert L. Youngs
Fred M. Lamb
Keywords:moisture gradient, slice, flake, thickness, radial, tangential
Date of defense:September 29, 1997
Availability:Release the entire work for Virginia Tech access only.
After one year release worldwide only with written permission of the student and the advisory committee chair.

Abstract:

The key to improving drying quality and reducing drying time and energy consumption lies in understanding and controlling moisture movement during drying. As wood dries, strains and stresses develop as a result of restraints imposed by moisture gradients and differential shrinkage in wood. So accurately measuring the moisture gradient in wood during drying will be helpful to improving drying quality.

In this project, moisture gradients in red oak will be measured through four different techniques----bandsaw slicing, Forstner bit layering, flaking and razor blade slicing. The first two techniques are found in the literature. The last two are developed in this study. The results obtained with these four techniques were compared, and it was found that the newly developed techniques could get moisture gradients that were closer to the true value.

The thickness of the slice was assumed to affect measuring the moisture gradient because of the environmental influences. So a thickness series was tested with the two new technique----flaking and razor blade slicing. The results showed that there was no slice or flake thickness effect on the moisture gradients.And an optimum slice and flake thickness was determined for the wood industries and research studies.

Finally, the directional effect on transverse moisture movement during kiln drying was examined through measuring moisture gradients in the tangential and radial directions of wood. The results showed that moisture moved slightly faster in the radial direction than in the tangential direction during kiln drying and the moisture gradients in the tangential direction were slightly steeper than those in the radial direction.


List of Attached Files

Bandsaw.pdf Chp1.pdf Chp2.pdf
Chp3.pdf Chp4.pdf Fig3-22.pdf
Flake.pdf Forstner.pdf Frontpag.pdf
Razor.pdf Referenc.pdf Table3-3.pdf
Table3-4.pdf Test1.pdf Test2.pdf
Test3.pdf Titlpag.pdf Vita.pdf

At the author's request, all materials (PDF files, images, etc.) associated with this ETD are accessible from the Virginia Tech network only.


The author grants to Virginia Tech or its agents the right to archive and display their thesis or dissertation in whole or in part in the University Libraries in all forms of media, now or hereafter known. The author retains all proprietary rights, such as patent rights. The author also retains the right to use in future works (such as articles or books) all or part of this thesis or dissertation.