Scholarly Communications Project


FLOOR VIBRATION DESIGN CRITERION FOR COLD-FORMED C-SHAPED SUPPORTED RESIDENTIAL FLOOR SYSTEMS

by

Cynthia A. Kraus

Master's Thesis submitted to the Faculty of the Virginia Tech in partial fulfillment of the requirements for the degree of

Master of Science

in

Civil Engineering

Approved

Thomas M. Murray, Chair
W. Samuel Easterling
Raymond H. Plaut

February 10, 1997
Blacksburg, Virginia


Abstract

FLOOR VIBRATION DESIGN CRITERION FOR COLD-FORMED C-SHAPED SUPPORTED RESIDENTIAL FLOOR SYSTEMS by Cynthia A. Kraus Dr. Thomas M. Murray, Chairman Civil Engineering Annoying floor vibration due to normal human activity was investigated for cold-formed C-shaped residential floors systems. Dynamic impact and static loading tests were performed on twelve full size laboratory floors and five two-joist line laboratory floors to determine the influencing characteristics of annoying vibrations in metal framed floors. Similar tests were conducted on eleven floors located in existing houses. Subjective evaluation, in terms of annoying vibration levels, of all floors was recorded. Four existing floor vibration criteria were investigated: 1) Australian Standard. Domestic Metal Framing Code, 2) Swedish Building Technology Design Guide developed by Professor Sven Ohlsson, 3) United States Proposed Timber Floor Vibration Criterion developed by James Johnson, and 4) Canadian Timber Floor Criterion developed by Donald Onysko. Data collected from testing was used to determine which of the four existing criteria best classified the perceived vibration level of the floors. One criterion is suggested as the most suitable for predicting the perceived vibration level of metal framed residential floors. Three methods to predict the vertical deflection of a floor subject to a concentrated load at mid-bay were examined. The results of applying these methods to the laboratory floors were compared to the actual measured values. The method which correlated the best with the measured values was selected for use in the proposed criterion.


List of attached files

File NameSize (Bytes)
CKTHESIS.PDF1,748,773 Bytes


The author grants to Virginia Tech or its agents the right to archive and display their thesis or dissertation in whole or in part in the University Libraries in all forms of media, now or hereafter known. The author retains all proprietary rights, such as patent rights. The author also retains the right to use in future works (such as articles or books) all or part of this thesis or dissertation.
[ETD main page] [Search ETDs][etd.vt.edu] [SCP home page] [library home page]

Send Suggestions or Comments to webmaster@scholar.lib.vt.edu