Scholarly
    Communications Project


Document Type:Master's Thesis
Name:Michael L. Holland
Email address:miholla2@vt.edu
URN:1998/00983
Title:Assembly Optimization for Double Row Ball Bearings
Degree:Master of Science
Department:Mechanical Engineering
Committee Chair: Charles F. Reinholtz
Chair's email:creinhol@vt.edu
Committee Members:Mary E.F. Kasarda
Robert H. Sturges
Keywords:Ball bearings, Assembly, Torrington, Double Row Bearings
Date of defense:August 24,1998
Availability:Release the entire work immediately worldwide.

Abstract:

This thesis is a treatise on optimal assembly methods for double row ball bearings. As with common single row bearings, double row ball bearings, consist of four general components, namely, an inner ring, an outer ring, a complement of balls and a cage or retainer to keep the balls separate. Unlike single row bearings, however, double row ball bearings have two complements of balls in two distinct parallel races. Although this double row configuration is desirable in a number of applications, it makes the bearings more difficult and expensive to assemble. In addition, current manual assembly procedures require a great deal of digital manipulation, leading to concern about carpal tunnel syndrome and other long-term repetitive motion injuries.

This thesis attempts to develop an improved assembly process for all types of double row bearings. Although the work is intended to be general, the Torrington 5203 double row ball bearing is adopted as a specific application example. This bearing's assembly difficulties and additional cost are a result of its manual Conrad assembly method and a rubber O-ring and groove used solely for bearing assembly. In the assembly process, the O-ring supports the upper balls temporarily until the two rings can be aligned concentrically, thus snapping the balls into the bearing races. This thesis addresses the replacement of the rubber O-ring and explores opportunities for bearing assembly automation.

Design synthesis of a retractable or reusable assembly component to replace the rubber O-ring supporting the upper balls during assembly is presented. A large group of design concepts are developed and evaluated, resulting in a small group of feasible designs. These feasible solutions are then tested, and a design that has the potential immediate implementation in an improved manual assembly process is proposed. In addition, two design concepts are presented as candidates for possible implementation in an automated assembly process.


List of Attached Files

Absplus.pdf Ch2.pdf Ch3.pdf
Ch4.pdf RefVita.pdf ch1.pdf


The author grants to Virginia Tech or its agents the right to archive and display their thesis or dissertation in whole or in part in the University Libraries in all forms of media, now or hereafter known. The author retains all proprietary rights, such as patent rights. The author also retains the right to use in future works (such as articles or books) all or part of this thesis or dissertation.